首页> 外文会议>Structural health monitoring and inspection of advanced materials, aerospace, and civil infrastructure 2015 >Nonlinear feature extraction methods for removing temperature effects in multi-mode guided-waves in pipes
【24h】

Nonlinear feature extraction methods for removing temperature effects in multi-mode guided-waves in pipes

机译:消除管道中多模导波温度效应的非线性特征提取方法

获取原文
获取原文并翻译 | 示例

摘要

Ultrasonic guided-waves propagating in pipes with varying environmental and operational conditions (EOCs) are usually the results of complex superposition of multiple modes travelling in multiple paths. Among all of the components forming a complex guided-wave signal, the arrivals scattered by damage (so called scatter signal) are of importance for damage diagnosis purposes. This paper evaluates the potentials of nonlinear decomposition methods for extracting the scatter signal from a multi-modal signal recorded from a pipe under varying temperatures. Current approaches for extracting scatter signal can be categorized as (A) baseline subtraction methods, and (B) linear decomposition methods, hi this paper, we first illustrate, experimentally, the challenges for applying these methods on multi-modal signals at varying temperatures. To better analyze the experimental results, the effects of temperature on multi-modal signals are simulated. The simulation results show that different wave modes may have significantly different sensitivities to temperature variations. This brings about challenges such as shape distortion and nonlinear relations between the signals recorded at different temperatures, which prevent the aforementioned methods to be extensible to wide range of temperatures. In this paper, we examine the potential of a nonlinear decomposition method, namely nonlinear principal component analysis (NLPCA), for removing the nonlinear relation between the components of a multi-modal guided-wave signal, and thus, extracting the scatter signal. Ultrasonic pitch-catch measurements from an aluminum pipe segment in a thermally controlled laboratory are used to evaluate the detection performance of the damage-sensitive features extracted by the proposed approach. It is observed that NLPCA can successfully remove nonlinear relations between the signal bases, hence extract scatter signal, for temperature variations up to 10℃, with detection accuracies above 99%.
机译:在环境和操作条件(EOC)变化的管道中传播的超声波导波通常是在多个路径中传播的多种模式的复杂叠加的结果。在形成复杂的导波信号的所有组件中,由损伤散射的到达信号(所谓的散射信号)对于损伤诊断很重要。本文评估了在温度变化的情况下,从管道记录的多模式信号中提取散射信号的非线性分解方法的潜力。当前提取散射信号的方法可以归类为(A)基线减法和(B)线性分解法。在本文中,我们首先以实验方式说明在变化的温度下将这些方法应用于多模式信号的挑战。为了更好地分析实验结果,模拟了温度对多模式信号的影响。仿真结果表明,不同的波模式可能对温度变化具有明显不同的敏感性。这带来了诸如在不同温度下记录的信号之间的形状失真和非线性关系之类的挑战,这阻碍了前述方法可扩展到宽温度范围。在本文中,我们检验了非线性分解方法(即非线性主成分分析(NLPCA))的潜力,该方法可消除多模态导波信号的成分之间的非线性关系,从而提取散射信号。在热控制实验室中,对铝管段进行超声波俯仰捕捉测量,用于评估所提出方法提取的对损伤敏感的特征的检测性能。观察到NLPCA可以成功消除信号基之间的非线性关系,从而提取散射信号,温度变化高达10℃,检测精度超过99%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号