Influence of PC-oligomer content in PC/ABS blend injection moldings

机译：PC / ABS共混注塑中PC低聚物含量的影响

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Effect of PC-oligomer content on morphology and mechanical properties including tensile, flexural, izod impact properties of PC/ABS blend injection moldings were investigated. Different content of PC-oligomer up to 20wt% was blended. Strain at break in tensile tests was found to be significantly increased with only 1wt% PC-oligomer.

机译：研究了PC低聚物含量对PC / ABS共混注塑成型品的形貌和力学性能（包括拉伸，弯曲，伊佐德冲击性能）的影响。掺混不同含量的至多20wt％的PC-低聚物。发现仅1wt％的PC-低聚物在拉伸试验中的断裂应变显着增加。

著录项

来源
《Society of Plastics Engineers Annual Technical Conference 2006(ANTEC 2006) vol.4; 20060507-11; Charlotte,NC(US)》|2006年|P.2150-2153|共4页
会议地点 CharlotteNC(US)
作者
Sungeon Kim; Kazutoshi Umemura; Toshihiro Yoshida; Masaya Kotaki; Hiroyuki Hamada;
展开▼
作者单位

Advanced Fibro science, Kyoto Institute of Technology, Mastugasaki Sakyo-ku Kyoto 606-8585, Japan;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类有机质材料;
关键词
PC-oligomer; internal structure; mechanical properties; PC/ABS blends;

机译：PC低聚物;内部结构;力学性能; PC / ABS共混物;

相似文献

外文文献
中文文献
专利

1. Effect of PC-Oligomer on Structure and Properties of PC/ABS Injection Mouldings [J] . T.Umemura, S.Takashima, M.Kotaki Polymers & Polymer Composites . 2008,第2期

机译：PC-低聚物对PC / ABS注塑成型结构和性能的影响
2. AN EVALUATION OF PROCESSABILITY BY INJECTION MOLDING OF ABS/PC BLENDS OBTAINED FROM RECYCLED MATERIALS [J] . M.J. Reig, V.J. Segui, S. Ferrandiz, Journal of polymer engineering . 2007,第1期

机译：通过注射成型回收材料获得的ABS / PC混合料的可加工性评估
3. RHEOLOGICAL BEHAVIOR MODELING OF RECYCLED ABS/PC BLENDS APPLIED TO INJECTION MOLDING PROCESS [J] . Miguel Jorge Reig, Vicente Jesus Segui, Jose Domingo Zamanillo Journal of polymer engineering . 2005,第5期

机译：再生ABS / PC混合料在注塑工艺中的流变行为建模
4. Influence of PC-oligomer content in PC/ABS blend injection moldings [C] . Sungeon Kim, Kazutoshi Umemura, Toshihiro Yoshida, Society of Plastics Engineers Annual Technical Conference . 2006

机译：PC-Oligomer含量在PC / ABS混合注塑成型中的影响
5. Study and modelization of the injection moulding process conditions of ABS/PC blends coming from recycled materials [D] . Reig Perez, Miguel Jorge 2004

机译：研究和建模来自再生材料的ABS / PC共混物的注塑工艺条件
6. Influence of Different Carbon-Based Fillers on Electrical and Mechanical Properties of a PC/ABS Blend [O] . Eleonora Dal Lago, Elisabetta Cagnin, Carlo Boaretti, 2020

机译：不同碳基填料对PC / ABS共混物电气和机械性能的影响
7. The Fracture Properties of Injection Molding PC/ABS Blend [O] . MingHsiung Ho, PinNing Wang, JungPeng Yeh 2016

机译：注塑PC / ABS混合物的断裂性能

Influence of PC-oligomer content in PC/ABS blend injection moldings

摘要

著录项

相似文献

相关主题

期刊订阅