AERODYNAMIC DESIGN AND RIG TEST VALIDATION OF A HIGH FLOW COEFFICIENT PROCESS CENTRIFUGAL COMPRESSOR STAGE

摘要

Efficient and diametrically compact very high flow coefficient stages with wide operability are desirable for economic reasons in many process multistage centrifugal compressor applications. Such stages present special aerodynamic and mechanical design challenges. There is often a sizeable efficiency lapse rate as well as substantial reduction in useable operating range for traditional stages having design flow coefficients greater than 0.15 and moderate to high machine Mach numbers. This paper describes aerodynamic design and rig test validation of a very high flow coefficient (Φo = 0.237) process centrifugal compressor stage. Some useful experience of the detailed design work required to navigate certain technical challenges and its rig test validation are reflected in the manuscript. A relatively high machine Mach number (Mu -0.878) mixed-flow shrouded impeller matched with a curved radial vaneless diffuser and return channel was developed. Test results confirmed that the principal aerodynamic design intents were met or exceeded. A sensible design strategy guided by a well-anchored design method is shown to successfully extend an existing stage portfolio to very high-flow coefficients for multistage process centrifugal compressor applications.