首页>外文会议>ASME Turbo Expo: Turbomachinery Technical Conference and Exposition

ASME Turbo Expo: Turbomachinery Technical Conference and Exposition

召开年：2019
召开地：Phoenix(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.UNSTEADY TURBINE RIM SEALING AND VANE TRAILING EDGE FLOW EFFECTS

机译：不稳定的涡轮边缘密封和叶片后缘流量效果
- 作者：Ivan Monge-Concepcion;Shawn Siroka;Reid A. Berdanier;Michael D. Barringer;Karen A. Thole;Christopher Robak
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
2.STRUCTURALLY CONSTRAINED AERODYNAMIC ADJOINT OPTIMISATION OF HIGHLY LOADED COMPRESSOR BLADES

机译：高负载压缩机叶片的结构受约束的空气动力伴随优化
- 作者：Cleopatra Cuciumita;Alistair John;Ning Qin;Shahrokh Shahpar
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- adjoint;
- optimisation;
- free-form deformation;
- von Mises stress;
- constraint;
3.THE TIP LEAKAGE VORTEX BREAKDOWN AND ITS POSSIBLE RELATIONSHIP WITH ROTATING INSTABILITY IN A SUBSONIC COMPRESSOR ROTOR

机译：尖端泄漏涡流击穿及其在亚音速压缩机转子中旋转不稳定性的可能关系
- 作者：Fan Yang;Yanhui Wu
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Tip leakage vortex;
- Breakdown;
- Rotating insta-bility;
- Unsteady flow;
- Back flow vortex;
4.SELF-EXCITED HIGH-FREQUENCY TRANSVERSE LIMIT-CYCLE OSCILLATIONS AND ASSOCIATED FLAME DYNAMICS IN A GAS TURBINE REHEAT COMBUSTOR EXPERIMENT

机译：燃气轮机再热燃烧室实验中自激高频横向极限周期振荡及相关火焰动态
- 作者：Jonathan McClure;Frederik M. Berger;Michael Bertsch;Bruno Schuermans;Thomas Sattelmayer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
5.THE EFFECTS OF FORCING DIRECTION ON THE FLAME TRANSFER FUNCTION OF A LEAN-BURN SPRAY FLAME

机译：强制方向对稀燃燃烧火焰火焰传递函数的影响
- 作者：Nicholas C. W. Treleaven;Andre Fischer;Andrew Garmory;Claus Lahiri;Gary J. Page;Max Staufer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
6.INVESTIGATION OF ADJACENT LIFTED FLAMES INTERACTION IN AN INLINE AND INCLINED MULTI-BURNER ARRANGEMENT

机译：在线和倾斜的多燃烧器布置中相邻提升火焰相互作用的研究
- 作者：Mohamed Shamma;Sven Hoffmann;Leonardo Langone;Stefan Raphael Harth;Rainer Koch;Sofia Galeotti;Nikolaos Zarzalis;Hans-Jorg Bauer;Antonio Andreini;Dimosthenis Trimis
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
7.ACOUSTIC-CONVECTIVE INTERFERENCE IN TRANSFER FUNCTIONS OF METHANE/HYDROGEN AND PURE HYDROGEN FLAMES

机译：甲烷/氢气和纯氢火焰传递函数的声学 - 对流干扰
- 作者：Eirik Esoy;Jose G. Aguilar;Mirko R. Bothien;Nicholas A. Worth;James R. Dawson
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
8.INVESTIGATION ON THE EFFECTS OF FIELD EMISSION PLASMA ON THE PERFORMANCE OF A MICRO-COMBUSTOR

机译：现场排放等离子体对微型燃烧器性能影响的研究
- 作者：De Giorgi;Cinieri Giacomo;Fontanarosa Donato;Ficarella Antonio;Maria Grazia
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
9.TURBINE INLET TEMPERATURE MEASUREMENTS IN A T 8200 KW GAS TURBINE USING WATER VAPOR EMISSION

机译：使用水蒸气发射的T 8200 kW燃气轮机中的涡轮机入口温度测量
- 作者：Dale R. Tree;Dustin Badger;Darrel Zeltner;Mohsen Rezasoltani
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- ISBR;
- Pyrometry;
- Turbine Temperature;
10.A METHOD OF SOLVING THREE TEMPERATURE PROBLEM OF TURBINE WITH ADIABATIC WALL TEMPERATURE

机译：一种用绝热壁温求三温度问题的方法
- 作者：Zeyu Wu;Xiang Luo;Jianqin Zhu;Zhe Zhang;Jiahua Liu
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- turbine, rotating cavity, convective heat transfer, three-temperature problem, adiabatic wall temperature;
11.MULTI-OBJECTIVE OPTIMIZATION OF AERO ENGINE COMBUSTOR ADOPTING AN INTEGRATED PROCEDURE FOR AERO-THERMAL PRELIMINARY DESIGN

机译：Aero发动机燃烧器的多目标优化采用航空热初步设计的集成程序
- 作者：Carlo Alberto Elmi;Ignazio Vitale;Hauke Reese;Antonio Andreini
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Aeronautics, Combustor, Optimization, Aerothermal, Design Automation, Methodology;
12.PERFORMANCE EVALUATION OF LEADING EDGE TUBERCLES APPLIED TO THE BLADES IN A 2-D COMPRESSOR CASCADE

机译：在2-D压缩机级联中施加到刀片的前缘结节的性能评估
- 作者：Satpreet S. Sidhu;Asad Asghar;William D.E. Allan
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
13.BAYESIAN INFERENCE OF EXPERIMENTAL DATA FOR AXIAL COMPRESSOR PERFORMANCE ASSESSMENT

机译：贝叶斯轴压缩机性能评估的实验数据推断
- 作者：Goncalo G. Cruz;Xavier Ottavy;Cedric Babin;Fabrizio Fontaneto
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
14.ASSESSMENT OF PROFILE TRANSFORMATION FOR TURBOMACHINERY LARGE EDDY SIMULATIONS - FROM ACADEMIC TO INDUSTRIAL APPLICATIONS

机译：涡轮机械大型涡流模拟简介转型评估 - 从学术到工业应用
- 作者：Clovis Gout;Dimitrios Papadogiannis;Jerome Dombard;Florent Duchaine;Laurent Gicquel;Nicolas Odier
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
15.EXPERIMENTAL INVESTIGATION OF GAS TURBINE AXIAL DIFFUSER PERFORMANCE: PART Ⅱ - EFFECT OF INLET FLOW PROFILES AT ON-AND OFF-DESIGN CONDITIONS

机译：燃气轮机轴向扩散器性能的实验研究：第Ⅱ型 - 入口流动型材在开近设计条件下的影响
- 作者：Kenneth Brown;Stephen Guillot;Wing Ng;Lee Iksang;Kim Dongil;Giwon Hong
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- axial diffuser;
- annular/conical;
- struts;
- high Reynolds number;
- inlet flow conditions;
- pressure recovery;
- kinetic energy parameter;
- mixing losses;
16.DELAY IDENTIFICATION IN THERMOACOUSTICS

机译：热声学延迟识别
- 作者：F. Gant;G. Ghirardo;A. Cuquel;M.R. Bothien
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
17.A DESIGN OF EXPERIMENTS BASED INVESTIGATION OF THE INFLUENCE OF HOT CROSS-FLOW GAS ON A FLOX®-BASED SINGLE-NOZZLE LIQUID BURNER

机译：基于实验的实验研究了热横流气体对基于FLOX®的单喷嘴液燃烧器的影响
- 作者：Saeed Izadi;Jan Zanger;Oliver Kislat;Benedict Enderle;Felix Grimm;Peter Kutne;Manfred Aigner;Cedric Kraus
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Design of Experiments;
- DOE;
- statistical analysis;
- FLOX*;
- single nozzle burner;
- liquid fuel;
- micro gas turbine;
- combustion;
- hydroxyl radical chemiluminescence (OH*-CL);
- Capstone C30;
- emissions;
18.COMPARISON OF MODEL ORDER REDUCTION METHODS IN THERMOACOUSTIC STABILITY ANALYSIS

机译：热声稳定性分析中模型顺序减少方法的比较
- 作者：Naman Purwar;Maximilian Meindl;Wolfgang Polifke
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
19.ANALYSIS OF LES AND 1D HOT-WIRE DATA TO DETERMINE ACTIVELY GENERATED MAIN FLOW TURBULENCE IN A FILM COOLING TEST RIG

机译：LES和1D热线数据分析，以确定薄膜冷却试验台中的主流湍流
- 作者：Lukas Fischer;Michael Strausswald;Michael Pfitzner
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
20.IMPROVING THE FILM COOLING PERFORMANCE OF A TURBINE ENDWALL WITH MULTI-FIDELITY MODELING CONSIDERING CONJUGATE HEAT TRANSFER

机译：考虑缀合热传递的多保真建模，提高涡轮机末端的薄膜冷却性能
- 作者：Hongyan Bu;Yufeng Yang;Liming Song;Jun Li
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
21.BASELINE AIRFOIL COOLING DESIGNS FOR A 5-10 MW COMBINED HEAT AND POWER TURBINE APPLICATION

机译：基线翼型冷却设计5-10 MW组合热电涡轮机应用
- 作者：Doug Straub;Sridharan Ramesh;Matthew Searle;Arnab Roy;James Black
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- combined heat and power;
- turbine thermal management;
- gas turbines;
22.EVALUATION OF BLOW-OFF DYNAMICS IN AERO-ENGINE COMBUSTORS USING RECURRENCE QUANTIFICATION ANALYSIS

机译：使用复制量化分析评估航空发动机燃烧器中的吹扫动力学
- 作者：Ho Yin Leung;Efstathios Karlis;Yannis Hardalupas;Andrea Giusti
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
23.COMBUSTOR DEVELOPMENT AND ENGINE DEMONSTRATION OF MICRO-MIX HYDROGEN COMBUSTION APPLIED TO M1A-17 GAS TURBINE

机译：微混合氢燃烧的燃烧器开发和发动机演示应用于M1A-17燃气轮机
- 作者：Atsushi Horikawa;Kunio Okada;Masato Yamaguchi;Shigeki Aoki;Manfred Wirsum;Harald H.-W. Funke;Karsten Kusterer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Industrial Gas Turbine;
- Combustor development;
- Engine Demonstration;
- Fuels;
- Hydrogen;
- Emission;
- NO_x;
24.ADJUSTMENT AND VALIDATION OF MONITORING SYSTEM ALGORITHMS ON THE SIMULATED HISTORICAL DATA OF AN AIRCRAFT ENGINE FLEET

机译：在飞机发动机舰队模拟历史数据上的监测系统算法调整与验证
- 作者：Igor Loboda;Victor Manuel Pineda Molina;Juan Luis Perez-Ruiz
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
25.ANALYSIS OF THE EMISSION REDUCTION POTENTIAL AND COMBUSTION STABILITY LIMITS OF A HYDROGEN-FIRED GAS TURBINE WITH EXTERNAL EXHAUST GAS RECIRCULATION

机译：具有外部废气再循环的氢气燃气轮机的排放降低电位和燃烧稳定性局限性分析
- 作者：Nils Hendrik Petersen;Thomas Bexten;Christian Gossrau;Manfred Wirsum
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
26.COMPARISON OF FILM COOLING PERFORMANCE FOR DIFFERENT PURGE SLOT CONFIGURATIONS IN A CYLINDRICAL AND STATE-OF-THE-ART NOZZLE GUIDE VANE

机译：圆柱形和最先进的喷嘴导向叶片中不同吹扫槽配置的薄膜冷却性能的比较
- 作者：Christian Landfester;Gunther Muller;Robert Krewinkel;Clemens Domnick;Martin Bohle
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
27.SIMULATION OF AIR/MIST COOLING AMONG SHOCK WAVES AND PASSING WAKES INTERACTIONS IN A TRANSONIC GAS TURBINE STAGE

机译：冲击波中空气/雾气冷却的仿真，并在跨音燃气涡轮机阶段的唤醒相互作用
- 作者：Ting Wang;Ramy Abdelmaksoud
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
28.FLOW AND HEAT TRANSFER MECHANISMS IN A ROTATING COMPRESSOR CAVITY UNDER CENTRIFUGAL BUOYANCY-DRIVEN CONVECTION

机译：离心浮力驱动对流下旋转式压缩机腔中的流动和传热机制
- 作者：Feng Gao;John W. Chew
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
29.PRELIMINARY EVALUATION OF THE 24 FT. DIAMETER FAN PERFORMANCE IN THE MINWATERCSP LARGE COOLING SYSTEMS TEST FACILITY

机译：24英尺的初步评估 MinwaterCSP大型冷却系统测试设施的直径风扇性能
- 作者：S.J. van der Spuy;D.N.J. Els;L. Tieghi;G. Delibra;A. Corsini;F.G. Louw;A. Zapke;C.J. Meyer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Axial flow fan, Air-cooled condenser, ACC, blade surface pressure.;
30.EVALUATION OF A FLOW MEASUREMENT PROBE INFLUENCE ON THE FLOW FIELD IN HIGH SPEED AXIAL COMPRESSORS

机译：评估流量测量探头对高速轴向压缩机流场的影响
- 作者：Ryosuke Seki;Satoshi Yamashita;Ryosuke Mito
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
31.VIRTUAL GAS TURBINES PART Ⅱ: AN AUTOMATED WHOLE-ENGINE SECONDARY AIR SYSTEM MODEL GENERATION

机译：虚拟燃气轮机部件Ⅱ：自动整体发动机二次空气系统模型
- 作者：Davendu Y. Kulkarni;Luca di Mare
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
32.CONSTRAINT HANDLING IN BAYESIAN OPTIMIZATION - A COMPARATIVE STUDY OF SUPPORT VECTOR MACHINE, AUGMENTED LAGRANGIAN AND EXPECTED FEASIBLE IMPROVEMENT

机译：贝叶斯优化的约束处理 - 支持向量机的比较研究，增强拉格朗日和预期可行改进
- 作者：Yuan JIN;Zheyi YANG;Shiran DAI;Yann LEBRET;Olivier JUNG
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
33.OPTIMIZATION OF AN ADDITIVELY MANUFACTURED U-BEND CHANNEL USING A SURROGATE-BASED BAYESIAN METHOD

机译：使用基于代理为基础的贝叶斯方法优化瘾地制造的U型弯曲频道
- 作者：Shinjan Ghosh;Ryan Wardell;Erik Fernandez;Jayanta S. Kapat;Sudeepta Mondal;Asok Ray
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
34.CHARACTERIZATION OF A NEWLY DESIGNED TEST BENCH FOR INVESTIGATIONS OF FLAME-WALL-INTERACTION

机译：用于调查火焰壁互动的新设计测试台的特征
- 作者：Rahand Dalshad;Tobias Sander;Michael Pfitzner
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
35.THERMOACOUSTIC STABILITY ANALYSIS OF A FULL-ANNULAR LEAN COMBUSTOR FOR HEAVY-DUTY APPLICATIONS

机译：重型应用全环贫燃烧器热声稳定性分析
- 作者：Daniele Pampaloni;Antonio Andreini;Alessandro Marini;Giovanni Riccio;Gianni Ceccherini
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
36.ON THE CHALLENGE OF DETERMINING THE SURGE LIMIT OF TURBOCHARGER COMPRESSORS: PART 1 - EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE OPERATING LIMITS

机译：确定涡轮增压器压缩机浪涌限制的挑战：第1部分 - 操作限制的实验性和数值分析
- 作者：T. Dielenschneider;J. Ratz S. Leichtfuss;H.-P. Schiffer;W. Eissler
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
37.PERFORMANCE AND EMISSION ASSESSMENT ON A 3KW MICRO GAS TURBINE: COMPARISON OF RANS AND LES PREDICTIONS

机译：3KW微型燃气轮机的性能和排放评估：RAN和LES预测的比较
- 作者：Alessio Pappa;Francesco F. Nicolosi;Antoine Verhaeghe;Laurent Bricteux;Massimiliano Renzi;Ward De Paepe
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
38.DYNAMIC MESH ADAPTION FOR SCALE-RESOLVING REACTING FLOW SIMULATIONS

机译：用于尺度解析反应流动模拟的动态网格适应
- 作者：Yu Xia;Phil Stopford;Patrick Sharkey;Ishan Verma
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
39.LES BASED CFD INVESTIGATION OF THE IGNITION PROCESS IN LEAN SPRAY BURNER

机译：基于LES的CFD调查稀薄喷砂燃烧器点火过程
- 作者：A. Andreini;M. Amerighi;L. Palanti;B. Facchini
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
40.COMPARISON OF PERFORMANCE OF FLAMELET GENERATED MANIFOLD MODEL WITH THAT OF FINITE RATE COMBUSTION MODEL FOR HYDROGEN BLENDED FLAMES

机译：挥动产生的歧管模型与氢共混火焰有限速率燃烧模型的性能比较
- 作者：Sourabh Shrivastava;Ishan Verma;Rakesh Yadav;Pravin Nakod;Stefano Orsino
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Hydrogen Combustion;
- FGM Combustion Model;
- Jet Flames;
- Swirl Burner Stabilized Flame;
41.SURGE PREVENTION TECHNIQUES FOR A TURBOCHARGED SOLID OXIDE FUEL CELL HYBRID SYSTEM

机译：涡轮增压固体氧化物燃料电池混合系统的浪涌预防技术
- 作者：L. Mantelli;M. L. Ferrari;A. Traverso
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
42.EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF INTEGRATED INTERNAL AND FILM COOLING DESIGNS INCORPORATING A THERMAL BARRIER COATING

机译：含有热屏障涂层的综合内膜冷却设计的实验和计算研究
- 作者：Matthew J. Horner;Christopher Yoon;Michael Furgeson;Todd A. Oliver;David G. Bogard
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- film cooling;
- thermal barrier coating;
- internal cooling;
- rib turbulators;
- shaped holes;
- heat transfer;
- gas turbine engines;
43.CFD EVALUATION OF INTERNAL FLOW EFFECTS ON TURBINE BLADE LEADING-EDGE FILM COOLING WITH SHAPED HOLE GEOMETRIES

机译：CFD对汽轮机叶片前缘薄膜冷却的内部流动效应评价
- 作者：Christopher C. Easterby;Jacob D. Moore;David G. Bogard
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Film Cooling;
- Shaped Holes;
- Showerhead;
- Computational Fluid Dynamics;
- Heat Transfer;
- Fluid Mechanics;
- Gas Turbine Engines;
- Leading Edge;
44.ASSESSMENT OF CFD MODELS FOR MULTIPHASE HEAT TRANSFER IN DIFFERENT BOILING REGIMES

机译：不同沸腾制度的多相热传递CFD模型的评估
- 作者：Cosimo Bianchini;Riccardo Da Soghe;Lorenzo Mazzei;Giuseppe Caggiano;Maddalena Angelucci
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Heat transfer;
- cryogenic;
- multiphase;
- CFD;
- boiling;
45.AERODYNAMIC OPTIMIZATION OF A TURBOCHARGER UNIT BASED ON THE OVERALL EFFICIENCY ENHANCEMENT OF AN INTERNAL COMBUSTION ENGINE FOR STATIONARY POWER PRODUCTION

机译：基于静止电力生产内燃机整体效率增强的涡轮增压器单元的空气动力学优化
- 作者：lacopo Catalani;Andrea Agnolucci;Francesco Balduzzi;Alessandro Bianchini;Andrea Arnone;Giovanni Ferrara;Giovanni Vichi;Alessandro Bellissima;Ryota Minamino;Go Asai
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
46.A COMPARISON BETWEEN ORC AND SUPERCRITICAL CO_2 BOTTOMING CYCLES FOR ENERGY RECOVERY FROM INDUSTRIAL GAS TURBINES EXHAUST GAS

机译：ORC与超临界CO_2底循环的比较，用于工业燃气轮机排气的能量回收
- 作者：M. A. Ancona;M. Bianchi;L. Branchini;A. De Pascale;F. Melino;A. Peretto;N. Torricelli
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- organic Rankine cycle;
- CO_2 supercritical;
- gas turbine;
- oil and gas;
- waste heat recovery;
- cogeneration;
47.SWEEP EFFECTS ON FAN-INTAKE AERODYNAMICS AT HIGH ANGLE OF ATTACK

机译：扫描对大攻角的风扇进气空气动力学的影响
- 作者：Ben Mohankumar;Cesare A. Hall;Mark J. Wilson
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
48.EFFECT OF DIFFERENTIAL TIP CLEARANCE ON THE PERFORMANCE OF A TANDEM ROTOR

机译：差分尖端清除对串联转子性能的影响
- 作者：Amit Kumar;Hitesh Chhugani;Shubhali More;A. M. Pradeep
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
49.EFFECTS OF SURFACE WAVINESS ON FAN BLADE BOUNDARY LAYER TRANSITION AND PROFILE LOSS - PART Ⅰ: METHODOLOGY AND COMPUTATIONAL RESULTS

机译：表面波纹对风扇叶片边界层过渡及轮廓损耗的影响 - 第Ⅰ部分：方法论和计算结果
- 作者：Jinwook Lee;Zoltan S. Spakovszky;Edward M. Greitzer;Mark Drela;Jerome Talbotec
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
50.VORTEX TRACKING OF PURGE-MAINSTREAM INTERACTIONS IN A ROTATING TURBINE STAGE

机译：旋转涡轮机级吹扫主流相互作用的涡流跟踪
- 作者：Alex W. Mesny;Mark A. Glozier;Oliver J. Pountney;James A. Scobie;Yan Sheng Li;David J. Cleaver;Carl M. Sangan
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Axial Turbine;
- Secondary Flows;
- Purge;
- Volumetric Velocimetry;
- Vortex Tracking;
51.DETACHED EDDY SIMULATION: RECENT DEVELOPMENT AND APPLICATION TO COMPRESSOR TIP LEAKAGE FLOW

机译：独立涡流仿真：最近的开发和应用于压缩机尖漏流
- 作者：Xiao He;Fanzhou Zhao;Mehdi Vahdati
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
52.NUMERICAL INVESTIGATION OF THE LOW-SWIRL FLOW IN AN AERONAUTICAL COMBUSTOR WITH ANGULAR AIR SUPPLY

机译：有角空气供应的航空燃烧器中低旋流的数值研究
- 作者：Sven Hoffmann;Rainer Koch;Hans-Joerg Bauer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
53.A REDUCED-ORDER MODEL FOR THE PRELIMINARY DESIGN OF SMALL-SCALE RADIAL INFLOW TURBINES

机译：小型径向流入涡轮机初步设计的阶数模型
- 作者：Marco Manfredi;Marco Alberio;Marco Astolfi;Andrea Spinelli
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
54.EFFECT OF A CERAMIC MATRIX COMPOSITE SURFACE ON FILM COOLING

机译：陶瓷基体复合表面对薄膜冷却的影响
- 作者：Peter H. Wilkins;Stephen P. Lynch;Karen A. Thole;San Quach;Tyler Vincent;Dominic Mongillo
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
55.Jet Impingement Heat Transfer Enhancement with Different Crossflow Diverier Shapes

机译：喷气冲击传热增强具有不同的横流分流形状
- 作者：Juan He;Qinghua Deng;Zhenping Feng
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Impingement cooling;
- Crossflow diverter;
- Nusselt number;
- Friction loss;
56.EFFECTS ON FILM COOLING PERFORMANCE IN THE SHOWERHEAD FROM GEOMETRIC PARAMETERIZATION OF SHAPED HOLE DESIGNS

机译：成形孔设计几何参数化对喷头薄膜冷却性能的影响
- 作者：Jacob D. Moore;Christopher C. Easterby;David G. Bogard
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- film cooling;
- shaped holes;
- showerhead;
- heat transfer;
- fluid mechanics;
- experimental;
- gas turbine engines;
57.CORRELATING CAVITY SEALING EFFECTIVENESS TO TIME-RESOLVED RIM SEAL EVENTS IN THE PRESENCE OF VANE TRAILING EDGE FLOW

机译：在存在叶片后边缘流动中将腔密封效能与时分分辨的边缘密封件发生相关性
- 作者：Shawn Siroka;Ivan Monge-Concepcion;Reid A. Berdanier;Michael D. Barringer;Karen A. Thole;Christopher Robak
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
58.PART-LOAD OPERATION OF GAS TURBINES INDUCED BY CO-GASIFICATION OF COAL AND BIOMASS IN AN INTEGRATED GASIFICATION COMBINED CYCLE POWER PLANT

机译：煤与生物质的共气化诱导的燃气轮机的部分负载运行在集成气化联合循环发电厂
- 作者：Silvia Ravelli
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- co-gasification;
- IGCC;
- gas turbine: part load;
- biomass;
59.A NEW TURBOMACHINE FOR CLEAN AND SUSTAINABLE HYDROCARBON CRACKING

机译：用于清洁和可持续的碳氢化合物裂缝的新型涡轮机
- 作者：Dylan Rubini;Budimir Rosic;Liping Xu;Harri Johannesdahl
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
60.ONE DIMENSIONAL MODELLING FOR PULSED FLOW TWIN-ENTRY TURBINE

机译：脉冲流动双入口涡轮机的一维建模
- 作者：Bijie Yang;Ricardo Martinez-Botas;Yingxian Xue;Mingyang Yang
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
61.Inlet Flow Distortion in an Advanced Civil Transport Boundary Layer Ingesting Engine Installation

机译：进入发动机安装的先进的民用运输边界层中的入口流动变形
- 作者：D. K. Hall;E. M. Greitzer;A. Uranga;M. Drela;S. A. Pandya
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
62.DESIGN AND ANALYSIS OF AN AIRCRAFT THERMAL MANAGEMENT SYSTEM LINKED TO A LOW-BYPASS RATIO TURBOFAN ENGINE

机译：与低旁路比率涡扇发动机相关的飞机热管理系统的设计与分析
- 作者：Robert A. Clark;Mingxuan Shi;Jonathan Gladin;Dimitri Mavris
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
63.A COMPREHENSIVE ANALYTICAL SHOCK LOSS MODEL FOR AXIAL COMPRESSOR CASCADES

机译：轴流压缩机级联的全面分析防震模型
- 作者：Milan Banjac;Teodora Savanovic;Djordje Petkovic;Milan V. Petrovic
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
64.MECHANISM ANALYSIS OF THE INFLUENCE OF BLADE THICKNESS DEVIATION ON THE PERFORMANCE OF AXIAL FLOW COMPRESSOR

机译：叶片厚度偏差对轴流压缩机性能影响的机制分析
- 作者：Tianyuan Ji;Wuli Chu;Zhengtao Guo;Jibo Yang
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Compressors;
- Blade;
- Machining Deviation;
- Aerodynamic performance;
65.Enhancing Turbine Deposition Prediction Capability with Conjugate Mesh Morphing

机译：增强涡轮机沉积预测能力与共轭网格形态
- 作者：Christopher P. Bowen;Jeffrey P. Bons
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
66.PROGRESSES IN PARTICLE-LADEN FLOWS SIMULATIONS IN MULTISTAGE TURBOMACHINERY WITH OPENFOAM

机译：通过OppyFoam的多级涡轮机器中的粒子升起的流动仿真
- 作者：Stefano Oliani;Riccardo Friso;Nicola Casari;Michele Pinelli;Alessio Suman;Mauro Carnevale
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
67.AERODYNAMIC DESIGN AND RIG TEST VALIDATION OF A HIGH FLOW COEFFICIENT PROCESS CENTRIFUGAL COMPRESSOR STAGE

机译：高流量系数处理离心压缩机阶段的空气动力学设计与钻井架验证
- 作者：Louis Larosiliere;Vishal Jariwala;Kapil Panchal
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Mixed-flow Impeller;
- High Flow Coefficient;
- Multistage Centrifugal Compressor;
68.COMPARISON STUDY ON STAGE PERFORMANCE OF CENTRIFUGAL COMPRESSORS WITH SHROUDED AND UNSHROUDED IMPELLERS

机译：带遮蔽和未遮盖叶轮离心压缩机舞台性能的比较研究
- 作者：Guang Xi;Chenxi Zhao;Yonghong Tang;Zhiheng Wang
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
69.IMPACT OF SWIRLING ENTROPY WAVES ON A HIGH PRESSURE TURBINE

机译：旋转熵波对高压涡轮机的影响
- 作者：Andrea Notaristefano;Paolo Gaetani
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
70.TRANSIENT THERMOACOUSTIC RESPONSES OF METHANE/HYDROGEN FLAMES IN A PRESSURIZED ANNULAR COMBUSTOR

机译：甲烷/氢火焰在加压环形燃烧器中的瞬态热声反应
- 作者：Byeonguk Ahn;Thomas Indlekofer;James Dawson;Nicholas Worth
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
71.MODAL DECOMPOSITION AND LINEAR MODELING OF SWIRL FLUCTUATIONS IN THE MIXING SECTION OF A MODEL COMBUSTOR BASED ON PIV DATA

机译：基于PIV数据的模型燃烧电机混合部分中的模态分解和线性建模
- 作者：Jens Satria Mueller;Finn Lueckoff;Thomas Ludwig Kaiser;Christian Oliver Paschereit;Kilian Oberleithner
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
72.OFF-DESIGN OF A PUMPED THERMAL ENERGY STORAGE BASED ON CLOSED BRAYTON CYCLES

机译：基于闭合布雷顿循环的泵浦热能储存的偏移设计
- 作者：Guido Francesco Frate;Luigia Paternostro;Lorenzo Ferrari;Umberto Desideri
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Pumped Thermal Electricity Storage;
- Brayton cycle;
- Off-design;
- Part-load;
- Inventory control;
73.IMPLEMENTATION OF VORTEX GENERATOR AND RAMP TO IMPROVE FILM COOLING EFFECTIVENESS ON BLADE ENDWALL

机译：涡流发生器和斜坡的实施，提高叶片端墙上的薄膜冷却效果
- 作者：Sadam Hussain;Xin Yan
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Film cooling;
- Vortex Generator;
- Ramp;
- Endwall;
74.CORRELATING TIME-RESOLVED PRESSURE MEASUREMENTS WITH RIM SEALING EFFECTIVENESS FOR REAL-TIME TURBINE HEALTH MONITORING

机译：用RIM密封效能与实时涡轮机健康监测相关的时间分辨压力测量
- 作者：Eric T. DeShong;Benjamin Peters;Reid A. Berdanier;Karen A. Thole;Kamran Paynabar;Nagi Gebraeel
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
75.USE OF AN INTEGRATED APPROACH FOR ANALYSIS AND DESIGN OF TURBOCHARGED INTERNAL COMBUSTION ENGINE

机译：使用涡轮增压内燃机分析和设计综合方法
- 作者：Thiago Ebel;Mark Anderson;Parth Pandya;Mat Perchanok;Nick Tiney;Steve P. Gravante
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- turbocharger;
- ICE;
- centrifugal compressor;
- turbine;
76.THE INFLUENCE OF PURGE FLOW PARAMETERS ON HEAT TRANSFER AND FILM COOLING IN TURBINE CENTER FRAMES

机译：吹扫流动参数对汽轮机中心框架传热和薄膜冷却的影响
- 作者：Patrick R. Jagerhofer;Marios Patinios;Tobias Glasenapp;Emil Goettlich;Federica Farisco
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
77.COUPLING OF MAINSTREAM VELOCITY FLUCTUATIONS WITH PLENUM FED FILM COOLING JETS

机译：压力料加膜冷却喷射主流速度波动的主流速度波动的耦合
- 作者：Spencer Sperling;Louis Christensen;Richard Celestina;Randall Mathison;Hakan Aksoy;Jong Liu;Jeremy Nickol
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
78.TOWARDS A MACHINE LEARNING BASED DESIGN FOR FOULING OF AN AXIAL TURBINE VANE

机译：朝向基于机器学习的轴向汽轮机叶片的设计
- 作者：Riccardo Friso;Stefano Oliani;Nicola Casari;Michele Pinelli;Alessio Suman;Francesco Montomoli
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
79.INFLUENCE OF SUPERSONIC NOZZLE DESIGN PARAMETERS ON THE UNSTEADY STATOR-ROTOR INTERACTION IN RADIAL-INFLOW TURBINES FOR ORGANIC RANKINE CYCLES

机译：超音速喷嘴设计参数对有机朗肯循环径向流入涡轮机不稳定定子 - 转子相互作用的影响
- 作者：Alessandro Cappiello;Raffaele Tuccillo
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Organic Rankine Cycle;
- Radial Inflow Turbine;
- supersonic stator;
- stator-rotor interaction;
- circumferential non-uniformity;
80.ROBUST DESIGN OPTIMIZATION OF AN INDUSTRIAL 1.5 STAGE AXIAL COMPRESSOR UNDER OPERATIONAL AND GEOMETRICAL UNCERTAINTIES

机译：运行和几何不确定性下工业1.5级轴向压缩机的鲁棒设计优化
- 作者：Alexandre Gouttiere;Dirk Wunsch;Remy Nigro;Virginie Barbieux;Charles Hirsch
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
81.CENTRIFUGAL COMPRESSOR AERO-MECHANICAL DESIGN: A MACHINE LEARNING APPROACH

机译：离心式压缩机航空机械设计：机器学习方法
- 作者：Dario Barsi;Andrea Perrone;Luca Ratto;Gianluca Ricci;Marco Sanguineti
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Centrifugal Compressor Design;
- Machine Learning;
- Performance prediction;
82.LOW-ORDER MODELING OF CAN-ANNULAR COMBUSTORS

机译：罐环燃烧器的低阶建模
- 作者：Guillaume J. J. Fournier;Max Meindl;Camilo F. Silva;Giulio Ghirardo;Mirko R. Bothien;Wolfgang Polifke
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
83.UNCERTAINTY IN HIGH-PRESSURE STATOR PERFORMANCE MEASUREMENT IN AN ANNULAR CASCADE AT ENGINE-REPRESENTATIVE REYNOLDS AND MACH

机译：在发动机代表雷诺和马赫的环形级联中高压定子性能测量的不确定性
- 作者：Lakshya Bhatnagar;Guillermo Paniagua;David G. Cuadrado;Papa Aye N. Aye-Addo;Antonio Castillo Sauca;Francisco Lozano;Matthew Bloxham
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
84.PARAMETRIC OPTIMIZATION OF FILM COOLING HOLE GEOMETRY

机译：薄膜冷却孔几何的参数优化
- 作者：Fraser B. Jones;Dale W. Fox;Todd Oliver;David G. Bogard
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
85.Impingement Heat Transfer Innovations and Enhancements: A Discussion on Selected Geometrical Features

机译：冲击传热创新和增强功能：关于所选几何特征的讨论
- 作者：Sandip Dutta;Prashant Singh
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Impingement;
- heat transfer;
- jet impingement;
- turbine cooling;
- orifice;
- crossflow;
86.EFFECT OF THE AXIAL CASING GROOVE GEOMETRY ON THE PRODUCTION AND DISTRIBUTION OF REYNOLDS STRESSES IN THE TIP REGION OF AN AXIAL COMPRESSOR ROTOR

机译：轴向套管沟槽几何形状对轴向压缩机转子尖端区域雷诺应力的生产和分布的影响
- 作者：Subhra Shankha Koley;Ayush Saraswat;Huang Chen;Joseph Katz
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Turbulence;
- Reynolds stresses;
- axial casing grooves;
- compressor stall;
- CFD;
87.A DETAILED LOSS ANALYSIS METHODOLOGY FOR CENTRIFUGAL COMPRESSORS

机译：离心式压缩机的详细损失分析方法
- 作者：Luying Zhang;Loukia Kritioti;Peng Wang;Jiangnan Zhang;Mehrdad Zangeneh
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- loss generation;
- entropy production;
- centrifugal compressors;
- design optimization.;
88.LOCALIZED BREAKUP INSTABILITIES FOR A LIQUID JET IN CROSSFLOW

机译：跨越液体喷射的本地化分解不稳定性
- 作者：Sheikh Salauddin;Wilmer Flores;Michelle Otero;Kareem Ahmed
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Multi-Resolution Dynamic Mode Decomposition;
- Jet breakup;
- Crossflow;
- Rayleigh-Taylor;
- Plateau-Rayleigh;
- momentum flux ratio;
- weber number;
89.GRID PLATE FLAME STABILIZER FOR HIGH INTENSITY GAS TURBINE COMBUSTION: THE INFLUENCE OF THE METHOD OF FUEL INJECTION ON MIXING, FLAME DEVELOPMENT AND NO_X EMISSIONS

机译：高强度燃气轮机燃烧网格板火焰稳定剂：燃料喷射方法对混合，火焰开发和NO_X排放的影响
- 作者：Jose Ramon Quinonez Arce;Gordon E. Andrews;Alan D. Burns;Naman Al-Dabbagh
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Computational Fluid Dynamics (CFD);
- Ultra low-NOx;
- Non-premixed combustion;
- Steady Laminar Flamelet;
- Mixing;
90.INTERNAL AERODYNAMIC PERFORMANCE EVALUATION OF DOUBLE ENTRANCE S-DUCT INTAKE AT MODERATELY HIGH SUBSONIC MACH NUMBER

机译：适度高亚音马赫数双入口S型管道摄入的内部空气动力学性能评估
- 作者：Satpreet Sidhu;Asad Asghar;William D.E. Allan;R.A. Stowe;R. Pimentel
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
91.THE UNSTEADY TOPOLOGY OF CORNER SEPARATIONS

机译：角分离的不稳定拓扑
- 作者：Ivo Dawkins;James Taylor;Xavier Ottavy;Rob Miller
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
92.EVALUATION OF DIFFERENT TURBULENCE MODELS APPLIED IN TURBOPUMP'S HYDRAULIC TURBINE

机译：涡轮泵液压涡轮机应用不同湍流模型的评价
- 作者：Daniel Ferreira;Correa Barbosa;Daniel da Silva Tonon;Luiz Henrique;Lindquist Whitacker;Jesuino Takachi Tomita;Cleverson Bringhenti
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Turbomachinery;
- Axial Turbine;
- CFD;
- Turbulence;
93.VIRTUAL GAS TURBINES PART Ⅰ: A TOP-DOWN GEOMETRY MODELLING ENVIRONMENT FOR TURBOMACHINERY APPLICATION

机译：虚拟燃气轮机部分Ⅰ：涡轮机械应用的自上一页几何建模环境
- 作者：Davendu Y. Kulkarni;Gan Lu;Feng Wang;Luca di Mare
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
94.ACOUSTIC PYROMETRY ROBUSTNESS TO TIME OF FLIGHT ESTIMATION ERRORS

机译：隔音测量鲁棒性与飞行时间估计误差
- 作者：Gianluca Caposciutti;Lorenzo Ferrari
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- Acoustic Pyrometry;
- Temperature Measurement;
- Time of Flight Estimation;
- Reconstruction Robustness;
95.THE EFFECT OF COMPRESSIBILITY FACTOR ON TURBINE PERFORMANCE

机译：压缩因子对汽轮机性能的影响
- 作者：David Baumgaertner;John J. Otter;Andrew P. S. Wheeler
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
96.ANALYSIS OF SWIRL NUMBER EFFECTS ON EFFUSION FLOW BEHAVIOUR USING TIME RESOLVED PIV

机译：使用时间解决PIV的旋流数效应对积液流动的影响分析
- 作者：T. Lenzi;A. Picchi;A. Andreini;B. Facchini
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
97.NUMERICAL INVESTIGATIONS ON THE AEROTHERMAL PERFORMANCE AND FILM COOLING EFFECTIVENESS OF TURBINE VANE ENDWALL AT INLET SWIRL CONDITIONS

机译：入口旋流条件下汽轮机叶片端壁的空气性能和薄膜冷却效能的数值研究
- 作者：Zhiyu LI;Kaiyuan ZHANG;Zhigang Li;Jun LI
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
98.STUDY ON CONJUGATE THERMAL PERFORMANCE OF A STEAM-COOLED RIBBED CHANNEL WITH THICK METALLIC WALLS

机译：厚金属壁蒸汽冷却肋通道的共轭热性能研究
- 作者：Lei Xi;Liang Xu;Jianmin Gao;Zhen Zhao
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
- gas turbine blade cooling;
- conjugate heat transfer;
- ribbed channel;
- steam cooling;
99.NUMERICAL INVESTIGATION OF THE AERODYNAMIC PERFORMANCE OF HYBRID AEROFOILS IN A 1.5-STAGE LOW-SPEED COMPRESSOR

机译：1.5级低速压缩机中混合翼型空气动力学性能的数值研究
- 作者：Jannik Eckel;Volker Glimmer
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年
100.ACCOUNTING FOR CIRCUMFERENTIAL FLOW NONUNIFORMITY IN A MULTI-STAGE AXIAL COMPRESSOR

机译：在多级轴流压缩机中呈周向流动不均匀性
- 作者：Fangyuan Lou;Douglas R. Matthews;Nicholas J. Kormanik;Nicole L. Key
- 会议名称：《ASME Turbo Expo: Turbomachinery Technical Conference and Exposition》 | 2021年