首页> 外文会议>International Conference on Emerging Technologies in Agricultural and Food Engineering >Optimization of Process Parameters for Microwave Drying of Garlic Cloves
【24h】

Optimization of Process Parameters for Microwave Drying of Garlic Cloves

机译:大蒜丁香微波干燥工艺参数的优化

获取原文

摘要

Application of microwaves for drying garlic cloves was investigated. A laboratory microwave-con vective dryer was developed which had the provision of regulating microwave power, air temperature and air velocity. Garlic cloves of uniform size were used in the drying experiments which were carried out at air temperatures of 40,50, 60 and 70°C, air velocities of 1.0 and 2.0 m/s and microwave power levels of 10, 20, 30 and 40 W. Microwave-convective drying was accomplished till the moisture content of the garlic cloves reduced from initial moisture content of 1.85 kg water/kg solids to a safer level of 0.06 kg water/kg solids. The drying time increased as the air velocity was increased from 1.0 to 2.0 m/s at all levels of air temperatures and microwave power. The specific energy consumption involved in all drying conditions was also estimated. The quality attributes of the fresh and dehydrated garlic cloves were evaluated for colour (L, a, b values), flavour strength and vitamin C. The rehydration ratio was also determined for the dehydrated garlic cloves. A convectionally dried commercial sample of garlic cloves from a local manufacturer was obtained. The quality attributes of this sample were compared with products dried by microwave-convective drying technique. The quality of garlic cloves, dehydrated by microwave-convective drying process, was found superior to the commercial sample. The process parameters for microwave-convective drying were optimized for the garlic cloves using Tukey's multi-comparison pair-wise test. The results revealed that the microwave power of 40 W, air temperature of 70°C and air velocity of 1.0 m/s gave good quality dehydrated garlic cloves and involved low specific energy consumption in the drying process.
机译:微波对干燥蒜瓣的应用进行了研究。开发了一种实验室微波炉型烘干机,其提供了规范微波功率,空气温度和空气速度。在40,50,60和70℃的空气温度下进行的干燥实验中使用均匀尺寸,空气速度为1.0和2.0m / s,微波功率水平为10,20,30和40 W.完成微波对流干燥,直至蒜瓣的水分含量从1.85kg水/ kg固体的初始水分含量降低到0.06kg水/ kg固体的更安全水平。随着空气速度的增加,随着空气温度和微波功率的1.0米/秒,干燥时间增加。还估计了所有干燥条件所涉及的具体能耗。评估新鲜和脱水蒜瓣的质量属性,用于颜色(L,A,B值),风味强度和维生素C.还测量脱水蒜瓣的再水化比。获得来自局部制造商的对联干燥的蒜瓣的商业样品。将该样品的质量属性与通过微波对流干燥技术干燥的产品进行比较。通过微波对流干燥过程脱水的蒜瓣的质量,发现优于商业样品。使用Tukey的多比较配对测试对微波对流干燥的过程参数进行了优化。结果表明,40瓦的微波功率,70°C的空气温度和1.0 m / s的空气速度给出了良好的脱水蒜瓣,涉及干燥过程中的低特异性能耗。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号