首页> 外文会议>Workshop on Inorganic Thin Films and Coatings >Study on the Fabrication and Properties of Ni-P Composite Coating
【24h】

Study on the Fabrication and Properties of Ni-P Composite Coating

机译:Ni-P复合涂层的制造与性能研究

获取原文

摘要

In this paper, the method of electroiess deposition of nickel-phosphorous composite coating on the sample surface is employed. The effect of the complexing agent ratio on the surface morphology and phase composition of nickel-phosphorus coating when the main salt and reducing agent concentration unchanged has been studied. The influence of heat treatment on properties and microstructure of coatings are also investigated. Experimental results show that in the case of salt and reducing agent concentration unchanged, complexing agent concentration has strong effect on the morphology of the coatings and the crystal structure of the composite coating. During heat treatment, the morphology of the composite coating changed significantly, and the hardness was improved a certain degree for all the samples, which is related to the precipitation of Ni_3P.
机译:本文采用了样品表面上镍 - 磷复合涂层的电磁沉积的方法。研究了络合剂比对当主要盐和还原剂浓度不变时的镍 - 磷涂层表面形态和相组合物的影响。还研究了热处理对涂层性能和微观结构的影响。实验结果表明,在盐和降低剂浓度不变的情况下,络合剂浓度对涂层的形态和复合涂层的晶体结构具有很强的影响。在热处理期间,复合涂层的形态显着变化,并且所有样品的硬度提高了一定程度,这与Ni_3P的沉淀有关。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号