Optimization through NSGA-II during machining of A356Al/20SiCp metal matrix composites using PCD Tool

摘要

Metal matrix composite (MMC) has established growing usages in the engineering for lightweight high-strength application. However, because of abrasive nature of the reinforcement particles in MMC, machinability is reduced, tool wear is high, yet only diamond tools are appropriate for machining MMC. Being a complex process, it is very complicated to establish optimal parameters for improving cutting performance. Tool flank wear (VBmax) and Average surface roughness (Ra) are the most significant output responses, which decide the machinability of a material. The effect of cutting parameters on output responses of tool flank wear and average surface roughness are conflict with each one another so there is no single optimal mixture of cutting parameters. In this study multi regression model function, based on NSGA-II was used to optimize the machining of Al/20%SiCp MMC using tipped polycrystalline diamond (PCD) tool and also characterize the relationship among input parameters and output performance. The NSGA-II based non dominated solutions of 30 combinations chosen from 100 and presented; none of them superior to any other each and every one are best based on engineer requirement.