首页> 外文会议>Applied Energy Symposium and Forum >A Study on the Particle Size and Velocity Profile on a Gasoline Port Injector Using a Phase Doppler Particle Analyzers(PDPA)
【24h】

A Study on the Particle Size and Velocity Profile on a Gasoline Port Injector Using a Phase Doppler Particle Analyzers(PDPA)

机译:使用相位多普勒颗粒分析仪(PDPA)汽油料喷射器上粒径和速度曲线的研究

获取原文

摘要

This study is to investigate particle size and velocity profile of gasoline port injector using Phase Doppler Particle Analyzer(PDPA).In this experiment,a GV 250 Delphi port injector used for motorcycles was used for liquid injection.The injector consists of four holes and has a static flow rate of 2.13 g/s.The fuel used in the injection was N-heptane,which is similar to gasoline,as an alternative fuel.The test fuel was injected at an atmospheric temperature of 20 °C and an open atmosphere of 1 atm.The injection time was 10 ms and the injection pressure was 3.5 bar in PDPA experiment.The experimental target position was fiexd at 30,50 and 75 mm from the nozzle tip and data were collected for a total of 10,000 samples.The experimental results show that the length diameter(D_(10)),the Sauter mean diameter(D_(32)),and the mean droplet velocity(MDV)are 45-54 μm,99-115 μm and 15-21 m/s,respectively.
机译:该研究是使用相位多普勒颗粒分析仪(PDPA)研究汽油端口注射器的粒度和速度曲线。本实验,用于摩托车的GV 250 Delphi端口注射器用于液体注射。注射器由四个孔组成注射中使用的静态流量为2.13 g / s。N-庚烷是类似于汽油,作为替代燃料。测试燃料在20°C的大气温度下注射和开放的气氛注射时间为10ms,PDPA实验中的注射压力为3.5巴。实验靶位位置是Fiexd,距离喷嘴尖端的30,50%,并收集数据总共10,000个样品。实验结果表明,长度直径(D_(10)),燃烧器平均直径(D_(32))和平均液滴速度(MDV)为45-54μm,99-115μm和15-21m / s,分别。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号