首页> 外文会议>International Symposium on Current Progress in Functional Materials >Synthesis of ZSM-5 zeolite from coal fly ash and rice husk: characterization and application for partial oxidation of methane to methanol
【24h】

Synthesis of ZSM-5 zeolite from coal fly ash and rice husk: characterization and application for partial oxidation of methane to methanol

机译:煤粉灰和稻壳ZSM-5沸石的合成:甲烷部分氧化对甲醇的表征及应用

获取原文

摘要

Indonesian fly ash (SiO2/Al2O3 mole ratio = 3.59) was used together with rice husk (SiO2 92%) as raw material for mesoporous ZSM-5 zeolite synthesis. Prior being used, coal fly ash and rice husk were subjected to pre-treatment in order to extract silicate (SiO4~(4-)) and aluminate (AlO4~(5-)) and to remove the impurities. Then the ZSM-5 zeolite were synthesized through hydrothermal treatment using two types of templates (TPAOH and PDDA). The as-synthesized ZSM-5 was characterized using FTIR, XRD, SEM-EDX, and BET. The result of FTIR showed peaks at 1250-950 cm~(-1) (V_(asymetric) T-O), 820-650 cm"1 (v_(symetric) T-O), and at 650-500 cm~(-1) confirming the presence of the five number ring of the pentasil structure. The result of XRD showed the appearance of certain peaks in the position 2 theta between 7-9° and 22-25° indicative of ZSM-5 structure, but also showed the pattern of low intensity magnetite and hematite. The SEM image showed the rough surface of hexagonal crystals from ZSM-5 structure, indicative of mesoporosity in the structure. EDX result showed Si/Al ratio of 20, while surface area analysis gave SA of 43.16.The ZSM-5 zeolites then was modified with cobalt oxide through impregnation method. The catalytic activity as heterogeneous catalysts in partial oxidation of methane was tested. The result showed that hence the catalytic activity of ZSM-5 and Co/ZSM-5 from fly ash and rice husk were still inferior compared to the pro-analysis sourced-counterpart, they were potential to be used as catalyst in the partial oxidation of methane to methanol.
机译:印度尼西亚粉煤灰(SiO2 / Al2O3摩尔比= 3.59)与稻壳(SiO 2 92%)一起使用作为中孔ZSM-5沸石合成的原料。在使用之前,进行煤粉灰和稻壳预处理以提取硅酸盐(SiO 4〜(4-))和铝酸盐(AlO4〜(5-))并除去杂质。然后通过使用两种类型的模板(TPAOH和PDDA)通过水热处理合成ZSM-5沸石。使用FTIR,XRD,SEM EDX和BET表征AS合成的ZSM-5。 FTIR的结果显示为1250-950cm〜(-1)(V_(偏移)至),820-650cm“1(V_(Symetric)至),并且在650-500cm〜(-1)确认五个顶环的偏振轴结构的存在。XRD的结果显示出在ZSM-5结构的7-9°和22-25°之间的位置2的某些峰的外观,但也显示了图案低强度磁铁矿和赤铁矿。SEM图像显示来自ZSM-5结构的六角形晶体的粗糙表面,指示结构中的中间渗透性。EDX结果显示Si / Al比例为20,而表面积分析为43.16的表面积分析。ZSM然后通过浸渍方法用氧化钴改性沸石。测试作为甲烷部分氧化的异质催化剂的催化活性。结果表明,ZSM-5和CO / ZSM-5的催化活性来自粉煤灰和水稻与Pro-Analysissourced-andperpart相比,稻壳仍然劣等,它们有可能使用a S催化剂在甲烷的部分氧化到甲醇中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号