首页> 外文会议>International Conference on Power and Energy Systems Engineering >Energy and exergy analysis of single slope passive solar still under Egyptian climate conditions
【24h】

Energy and exergy analysis of single slope passive solar still under Egyptian climate conditions

机译:单坡被动太阳能的能量和漏洞分析仍在埃及气候条件下

获取原文

摘要

In this study, a comprehensive exergetic performance investigation of a single slope a passive solar still system is theoretically presented. Energy and exergy methodologies have been applied for all components of the solar still comprising glass cover, brackish water, and basin-liner. Also, exergy irreversibility analysis was conducted to identify and localize the sources responsible for the exergy destruction and losses in the system for further analysis and improvement. The theoretical model was solved numerically by using fourth-order Runge-Kutta method and the program was written by MATLAB. To examine the validity of the model, the numerical results were verified with the available experimental data in the literature. The numerical results were in good correspondence with the experimental data for the components' temperatures and output productivity. The results showed that the maximum energy and exergy efficiencies of the proposed system are 32.5 % and 2.23 %, respectively. It is observed that the exergy efficiency has much lower value than the energy efficiency. The maximum irreversibility or exergy destruction in each component, i.e. glass cover, saline water, and basin-liner, has been estimated as 61.1, 50.2 and 717 W/m~2, respectively, related to the maximum solar exergy input of 1005 W/m~2. Furthermore, the results showed that exergy destructions rates in the solar still is proportional to the received solar insolation. From irreversibility analysis, it is found that the basin liner accounts for the highest exergy destruction (86% of the total exergy destruction).
机译:在这项研究中,理论上呈现了一系列坡度的综合性表现调查。能量和漏洞方法已经应用于太阳的所有组件,仍然包括玻璃盖,咸水和盆地衬垫。此外,进行了无法透视分析,以确定和本地化负责系统中遭受毁灭和损失的来源,以进一步分析和改进。通过使用四阶跑为-Kutta方法来数值解决了理论模型,并且该程序由Matlab写入。为了检查模型的有效性,用文献中的可用实验数据验证了数值结果。数值结果与组件温度和输出生产率的实验数据良好的对应关系。结果表明,所提出的系统的最大能量和漏洞效率分别为32.5%和2.23%。观察到,高效率比能效远低得多。每个组分,即玻璃盖,盐水和盆地衬里的最大不可逆转性或漏洞破坏估计分别为61.1,50.2和717 W / m〜2,与1005 W的最大太阳能输入有关。 m〜2。此外,结果表明,太阳太阳的破坏率仍与所接收的太阳能缺失成比例。从不可逆转的分析中,发现盆地衬垫占最高的毁灭性破坏(占绝商破坏的86%)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号