首页> 外文会议>International Conference on Green Design and Manufacture >Application of Water and Wind Energy for Low Cost Portable Mobile Phone Charger (PMPC)
【24h】

Application of Water and Wind Energy for Low Cost Portable Mobile Phone Charger (PMPC)

机译:水和风能在低成本便携式手机充电器中的应用(PMPC)

获取原文

摘要

The primary focused of this project is to develop a portable and low-cost electric generator purposely as a mobile phone charger by using two renewable energy sources that are wind and water. Usually, when people went into the forest for camping, they will get hard to charge their phones. They can use a power bank to charge up their phone but not for so long because the power bank also will be empty sooner or later. They need a very convenient way to charge their phones or power bank. There is also solar charger power bank but this kind of Portable Mobile Phone Charger only use the sun as the source which can cause problems when it comes at night time. The user had to wait for sunrise to charge the power bank. Sometimes, the consistency of using the solar power bank also drops when in the forest. There are limited sunlight. Hence, the user needs an unlimited energy source that they can use to generate electricity. This project uses renewable energy as the main source of this project. The two energy is wind and water. These energies will be used to harvest electrical energy to charge mobile phones and other small electronic applications. When the energy is in contact with the turbines, it will produce electricity. A small DC motor and the hydro generator will be used. After generating the electricity, it will be stored in the capacitors. These capacitors act as energy storage to charge the mobile phone. Next, Arduino Uno is used to read the voltage output from the wind generator and the water generator and display the voltage reading using the LCD display. The LCD will display the changes in voltage from the wind and water generator. This will alert the user about how much the output voltage obtains from the motor generators. Then, the voltage will be step up and maintain to 5 volts because that is the main target for this project that is to produce a 5 volt as the output to charge mobile phones. The LCD display will display few readings of the voltage in three diffe
机译:该项目的主要集中在该项目的主要是通过使用诸如风水和水的可再生能源,以手机充电器故意开发便携式和低成本的发电机。通常,当人们进入森林露营时,他们会很难为手机充电。他们可以使用Power Bank对手机充电但是对于这么长时间,因为电力银行也将迟早空。他们需要一种非常便捷的方式来为他们的手机或电力银行充电。还有太阳能充电器电源银行,但这种便携式手机充电器只使用太阳作为源极会在夜间出现问题。用户必须等待日出来为电力库充电。有时,使用太阳能电源的一致性也在森林时掉落。阳光有限。因此,用户需要一个无限的能量来源,它们可以用来产生电力。该项目使用可再生能源作为该项目的主要来源。两个能量是风和水。这些能量将用于收获电能以对移动电话和其他小型电子应用充电。当能量与涡轮机接触时,它将产生电力。将使用小型电机和水电发电机。在产生电力后,它将存储在电容器中。这些电容器充当能量存储以充电给手机。接下来,使用Arduino UNO读取来自风力发生器和水发生器的电压输出,并使用LCD显示屏显示电压读数。 LCD将显示来自风力和水发生器的电压的变化。这将提醒用户从电机发生器获得输出电压的数量。然后,电压将加紧并维持到5伏,因为这是该项目的主要目标,它是产生5伏作为输出以充电移动电话。 LCD显示屏将显示三个不同的电压读数

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号