首页> 外文会议>International Conference on Materials and Metallurgical Engineering and Technology >Study of aniline polymerization reactions through the particle size formation in acidic and neutral medium
【24h】

Study of aniline polymerization reactions through the particle size formation in acidic and neutral medium

机译:通过酸性和中性介质粒度形成苯胺聚合反应的研究

获取原文

摘要

In the present paper, we reported particle size kinetic studies on the conducting polyaniline (PANI) which synthesized through a chemical oxidative polymerization technique from aniline monomer. PANI was prepared using ammonium persulfate (APS) as oxidizing agent which carried out in acidic and neutral medium at various batch temperatures of respectively 20, 30 and 50 °C. From the studies, it was noticed that the complete polymerization reaction progressed within 480 minutes duration time. The pH of the solution during reaction kinetic reached values 0.8 - to 1.2 in acidic media, while in the neutral media the pH value reached values 3.8 - 4.9. The batch temperature controlled the polymerization reaction in which the reaction progressing, which followed by the temperature rise of solution above the batch temperature before settled down to the initial temperature. An increment in the batch temperature gave highest rise in the solution temperature for the two media which cannot be more than 50 °C. The final product of polymerization reaction was PANI confirmed by Fourier Transform Infra-Red (FTIR) spectrophotometer for molecule structure identification. The averages particle size of PANI which carried out in the two different media is evidently similar in the range 30 - 40 μm and insensitive to the batch temperature. However, the particle size of PANI which obtained from the polymerization reaction at a batch temperature of 50 °C under acidic condition reached ~53.1 μm at the tip of the propagation stage which started in the first 5 minutes. The size is obviously being the largest among the batch temperatures. Whereas, under neutral condition the particle size is much larger which reached the size 135 μm at the batch temperature of 20 °C. It is concluded that the particle size formation during the polymerization reaction being one of the important parameter to determine particle growing of polymer which indicated the reaction kinetics mechanism of synthesize polyaniline.
机译:在本文中,我们报道了通过来自苯胺单体的化学氧化聚合技术合成的导电聚苯胺(PANI)的粒径动力学研究。使用过硫酸铵(AP)作为氧化剂制备PANI,其在分别为20,30和50℃的各个批料温度下在酸性和中性介质中进行。从研究来看,注意到,完全聚合反应在480分钟的持续时间内进行。在反应动力学期间溶液的pH值达到酸性介质中的值0.8-1.2,而在中性介质中,pH值达到值3.8-4.9。批量温控了聚合反应,其中反应进展,然后在待止泊至初始温度之前的批量温度上方的溶液的温度升高。批量温度的增量在溶液温度下升高了不能超过50℃的介质的溶液温度。聚合反应的最终产物是通过傅立叶变换红外(FTIR)分光光度计证实的PANI,用于分子结构鉴定。在两种不同介质中进行的PANI的平均粒径在30-40μm的范围内明显相似并且对批料温度不敏感。然而,在酸性条件下在50℃的批量温度下从聚合反应获得的PANI的粒径达到〜53.1μm,在前5分钟开始。大小显然是批料温度中最大的。然而,在中性状态下,粒度大得多,其在批量温度为20℃下达到尺寸135μm。结论是聚合反应期间的粒度形成是确定聚合物颗粒生长的重要参数之一,这表明合成聚苯胺的反应动力学机理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号