首页> 外文会议>Waikato Young Research Engineers Symposium >Durability of Pultruded Glass Fibre Reinforced Polymer Composite Subjected to Hygrothermal Ageing in Sea Water
【24h】

Durability of Pultruded Glass Fibre Reinforced Polymer Composite Subjected to Hygrothermal Ageing in Sea Water

机译:草湿玻璃纤维增​​强聚合物复合材料的耐久性对海水湿热时效

获取原文

摘要

Durability of glass fibre reinforced polymer (GFRP) composite is an important research topic because the changes occur in GFRP composite with ageing can affect its properties and lifetime. For long term use, GFRP composites should be examined in real time and with reasonable in-service environments. However, this is not practical because the time involved would significantly delay product development and therefore, accelerated ageing technique is required. Conditioning in wet and elevated temperatures known as hygrothermal ageing is a very useful technique to evaluate the durability of GFRP composites in a reasonable timeframe. In this work, pultruded GFRP composites were aged in sea water and in dry conditions at 23, 55 and 75°C for 0, 8 and 20 months to assess the changes in shear properties (e.g. short beam shear strength, SBSS and transverse shear strength, TSS) and in glass transition temperature, T_g. After ageing in sea water for 20 months, SBSS was found to retain by about 101, 102 and 95% at 23, 55 and 75°C, respectively. On the other hand, SBSS was retained by around 106% after ageing in dry condition for 20 months at 55 and 75°C. TSS was found to retain by approximately 99, 95 and 91% after ageing in sea water for 20 months at 23, 55 and 75°C, respectively, whereas TSS of dry conditioned samples was retained by about 105 and 107% at 55 and 75°C, respectively. T_g, measured by dynamic mechanical thermal analyser, showed little change both in wet and dry conditions at different temperatures and time.
机译:玻璃纤维增​​强聚合物的耐久性(GFRP)复合材料是一个重要的研究主题,因为在GFRP复合材料中发生的变化随老化可能会影响其性质和寿命。对于长期使用,应实时检查GFRP复合材料,并具有合理的在职环境。然而,这是不实际的,因为所涉及的时间将显着延迟产品开发,因此,需要加速老化技术。称为湿热老化的湿和高温的调节是一种非常有用的技术,可以在合理的时间范围内评价GFRP复合材料的耐久性。在这项工作中,将Pultruded GFRP复合材料在海水中和23,55和75℃的干燥条件下为0,8和20个月,以评估剪切性能的变化(例如短束剪切强度,SBSS和横向剪切强度,TSS)和玻璃化转变温度,T_G。在海水中老化20个月后,发现SBSS分别在23,55和75℃下保留约101%,102和95%。另一方面,在55和75℃下,在干燥条件下老化后,SBSS在55和75℃下保持约106%。在23,55和75°C时,发现在海水中老化20个月后,在海水中造成衰老后的约99,95%和91%,而干燥条件样品的TSS在55和75处保留约105%和107% °C分别。通过动态机械热分析仪测量的T_G,在不同温度和时间的湿和干燥条件下表现出微小的变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号