首页> 外文会议>International Conference on Innovation in Polymer Science and Technology >Increased Electrical Conductivity of PANi:Anionic Surfactant Addition during Emulsion Polymerization
【24h】

Increased Electrical Conductivity of PANi:Anionic Surfactant Addition during Emulsion Polymerization

机译:乳液聚合过程中的阴离子表面活性剂加入的增加的导电性增加

获取原文

摘要

Electrically conductive polyaniline(PANi)doped with anionic surfactants is successfully synthesized and characterized.The conductive PANi is prepared by chemical oxidation polymerization reaction with the addition of two types of anionic surfactant solutions respectively 1% Sodium Octyl Sulfate(NaC8H_(17)SO4,SOS)and Sodium Dodecyl Sulfate(NaC_(12)H_(25)SO4,SDS),followed by doping with a strong perchloric acid(HClO4).The addition of each surfactant solution has increased the electrical conductivity value of surfactant free PANi from 0.089 to 1.16 S cm~(-1)(SOS)and 1.12 S cm~(-1)(SDS)respectively.The viscosity value of surfactant free PANi is 1.97 mPa s which is much lower when compared with those of PANi containing surfactants in which the value is 3.58 and 4.20 mPa s for 1% of SDS added PANi each.The chain length of anionic surfactant has no major effect on the conductivity of PANi.The latter is only affected by the presence of SO_3~-group in hydrophobic part of surfactant.
机译:成功合成和表征掺杂有阴离子表面活性剂的导电聚苯胺(PANI)。通过添加两种类型的阴离子表面活性剂溶液,通过化学氧化聚合反应来制备导电PANI分别为1%辛基硫酸钠(NaC 8H_(17)SO4,SOS )和十二烷基硫酸钠(NaC_(12)H_(25)SO4,SDS),然后用强高氯酸(HClO4)掺杂。添加每个表面活性剂溶液的加法增加了表面活性剂Faili的电导率值0.089 1.16 S cm〜(-1)(SOS)和1.12 S cm〜(-1)(SDS)。与含有含PANI的表面活性剂相比,表面活性剂游泳池的粘度值是1.97MPa S. 值为3.58和4.20MPa s,每个SDS增加Pani。阴离子表面活性剂的链长对PANI的电导率没有重大影响。后者仅受疏水部分中的SO_3〜-Group的存在影响 表面活性剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号