【24h】

Influence of cathode potential on Ti electrodeposition in molten fluoride

机译:阴极电位对熔融氟化钨电沉积的影响

获取原文

摘要

The electrolysis condition to obtain Ti metal in a CaF_2-MgF_2 with CaO and TiO_2 has been studied at 1573K. It was shown by cyclic voltammetry that cathodic current increased below 0.8V (vs. Mg/Mg~(2+)) with CaO and TiO_2 addition and that three reduction steps of Ti was suggested. The particles containing Ti were obtained by potentio-static electrolysis; only Ti oxide particles were detected by the electrolysis above 0.5V, while Ti metal particles did by the electrolysis below 0.4V. This result indicates that Ti metal can be electrodeposited below 0.4V (vs. Mg/Mg~(2+)).
机译:在1573K中已经研究了在CAO和TiO_2中获得CAF_2-MGF_2中Ti金属的电解条件。通过CaO和TiO_2的加入循环伏安法显示循环伏安法,其阴极电流增加0.8V(与Mg / mg〜(2+)的增加,并提出了三个Ti的减少步骤。含有Ti的颗粒是通过静态电解获得的;通过高于0.5V的电解检测Ti氧化物颗粒,而Ti金属颗粒通过低于0.4V的电解。该结果表明Ti金属可以电沉积在0.4V(与Mg / mg〜(2+)下方电沉积。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号