首页> 外文会议>International Conference on Competitive Materials and Technological Processes >Synthesis and crystallization of titanium dioxide in supercritical carbon dioxide (scCO2)
【24h】

Synthesis and crystallization of titanium dioxide in supercritical carbon dioxide (scCO2)

机译:超临界二氧化碳中二氧化钛的合成与结晶(SCCO2)

获取原文

摘要

In this work, a simple and low-temperature method to synthesize titanium dioxide (TiO2) particles with supercritical carbon dioxide is presented. The particles were synthesized by measuring 5 ml of tetra-n-butyl orthotitanate precursor to the supercritical chamber. The pressure was maintained at 15.0 MPafor all experiments. Reaction temperatures used were 50 °C or 70 °C. After reaching treatment parameters 10 ml of deionized water was introduced to the chamber with a co-solvent pump. A mixer was used inside the chamber to ensure proper mixing of water and precursor. Reaction times of 10, 60 and 300 min were used. Characterization of the particle crystal phase was determined by X-ray diffraction, differential scanning calorimetry and transmission electron microscopy. The specific surface areas were measured with nitrogen adsorption tests (BET). The results showed that the particles synthesized with reaction times of 10 and 60 min contained brookite as the crystalline phase. With longer reaction time of 300 min the phase shifted to anatase. In most experiments there was also significant amount of amorphous phase present. The specific surface areas varied between 274.3-566.6 m~2/g.
机译:在这项工作中,提出了一种简单而低温的方法,以合成二氧化钛(TiO 2)具有超临界二氧化碳的颗粒。通过测量5ml的四丁基正向钛的前体,通过向超临界室测量颗粒来合成颗粒。压力保持在15.0mpafor所有实验中。使用的反应温度为50℃或70℃。在达到处理参数后,用共溶剂泵将10ml去离子水引入腔室。在腔室内使用混合器以确保水和前体的适当混合。使用10,60和300分钟的反应时间。通过X射线衍射,差示扫描量热法和透射电子显微镜测定颗粒晶相表征。用氮吸附试验(BET)测量比表面积。结果表明,在10至60分钟的反应时间合成的颗粒作为结晶相含有溴钛矿。较长反应时间为300分钟,相移至锐钛矿。在大多数实验中,存在显着量的无定形相。比表面积不同274.3-566.6m〜2 / g。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号