首页> 外文会议>International Conference on Applied Physics and Material Applications >Thermoelectric Properties and Power Generation of p-Ca_3Co_4O_9 and n-Sr_(0.87)La_(0.13)TiO_3 Thermoelectric Modules
【24h】

Thermoelectric Properties and Power Generation of p-Ca_3Co_4O_9 and n-Sr_(0.87)La_(0.13)TiO_3 Thermoelectric Modules

机译:P-CA_3CO_4O_9和N-SR_(0.87)LA_(0.13)TIO_3热电模块的热电性能和发电

获取原文

摘要

The Ca_3Co_4O_9 (CCO) and Sr_(0.87)La_(0.13)TiO_3 (SLTO) are good property of oxide thermoelectric (TE) materials. They synthesized by solid state reaction (SSR) method to study thermoelectric properties and fabrication of thermoelectric module. It was found that, synthesis of CCO shows that Seebeck coefficient, electrical resistivity, thermal conductivity and ZT values are 130 μV K~(-1), 8.31 mΩ cm, 0.82 W m~(-1) K~(-1) and 0.08, respectively at 473 K. The Seebeck coefficient, electrical resistivity, thermal conductivity and ZT values of SLTO are -359 μV K~(-1), 2.9 mΩ m, 18.09 W m~(-1) K~(-1) and 1.13×l0~(-3), respectively at473 K. TE modules of CCO and SLTO were fabricated by ultra sonic soldering method. The power generation of TE modules were measured with temperature difference (ΔT) of 10-180 K. The 1 pair and 2 pairs TE modules for a maximum power generation of matching load are 19 kΩ and 30 kΩ, respectively. The maximum output power of 2 pairs TE module is larger than 1 pair TE module about two times.
机译:CA_3CO_4O_9(CCO)和SR_(0.87)LA_(0.13)TiO_3(SLTO)是氧化物热电(TE)材料的良好性质。它们通过固态反应(SSR)方法合成,以研究热电性能和制造热电模块。结果发现,CCO的合成表明,塞贝克系数,电阻率,导热率和ZT值是130μVK〜(-1),8.31mΩcm,0.82w m〜(-1)k〜(-1)和0.08分别在473 K. SLTO的塞贝克系数,电阻率,导热率和ZT值为-359μVK〜(-1),2.9mΩm,18.09w m〜(-1)k〜(-1)和1.13×L0〜(-3),分别由超声波焊接法制造CCO和SLTO的TE模块。用10-180K的温度差(ΔT)测量TE模块的发电。对于最大发电的1对和2对TE模块,分别为19kΩ和30kΩ。 2对TE模块的最大输出功率大于1对TE模块大约两次。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号