首页> 外文会议>Conference on Plasma-Surface Interactions >Study of tungsten as a plasma-facing material for a fusion reactor
【24h】

Study of tungsten as a plasma-facing material for a fusion reactor

机译:钨作为熔融反应器的偏离等离子体材料的研究

获取原文

摘要

The paper presents the development of experimental investigations and recent results of the impact on tungsten at high level of radiation damage under steady-state deuterium plasma. Tungsten is considered as a plasma facing material for a fusion reactor. The effect of fusion neutron impact is simulated by surrogate irradiations with high-energy ions. The primary defects at 1-100 dpa were produced in tungsten samples by He and C ions accelerated in the Kurchatov cyclotron to 3-10 MeV at the total fluence of 10~(17)-10~(19) cm~(-2). The irradiated material was studied in deuterium plasma on the LENTA linear divertor simulator at the plasma fluence 10~(21)-10~(22) D/cm~2. Erosion dynamics, development of the surface microstructure and deuterium retention were analyzed. Increased deuterium retention detected previously in tungsten pre-irradiated by He ions was also registered (ERDA) on C-irradiated samples at 2-3 dpa. In contrast, a significant decrease in the D uptake has been observed on those samples operated in the experiments at 500 °C.
机译:本文介绍了在稳态氘血浆下高水平辐射损伤对钨的实验研究和最近对钨的影响的发展。钨被认为是融合反应器的等离子体面对材料。通过具有高能离子的替代辐射模拟融合中子冲击的影响。 1-100dPa的主要缺陷是在钨样品中通过他和C离子在Kurchatov回旋加速器中加速的,总使用10〜(17)-10〜(19)cm〜(-2)的3-10mev 。在乙醛线性偏移器模拟器上在血浆流量10〜(21)-10〜(22)D / cm〜2上的氘血浆中研究辐照材料。分析了侵蚀动态,分析了表面微观结构和氘保持的发展。在2-3dPa的C辐照样品中,预先检测到先前在预先照射的钨中检测到的氘保留增加。相反,已经在500℃下在实验中操作的那些样品上观察到D吐温的显着降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号