首页> 外文会议>International Conference on Advanced Materials Development Performance >Controlled Physical Gelation of Thermoresponsive Poly(2-propionamidoacrylic acid) Aqueous Solution
【24h】

Controlled Physical Gelation of Thermoresponsive Poly(2-propionamidoacrylic acid) Aqueous Solution

机译:热响应聚(2-丙胺酰基丙烯酸)水溶液的受控物理凝胶化

获取原文

摘要

The thermoresponsive properties of aqueous poly(2-propionamidoacrylic acid) (PPA) solutions were studied in the presence of calcium chloride (CaCl_2). The turbidity and viscosity of a PPA solution depended on temperature and concentration of the polymer and salt added. For example, a transparent PPA solution changed to a turbid gel at a temperature higher than the cloud point in the presence of a relatively high concentration of CaCl_2. The mechanism of physical gelation was considered by comparing the thermoresponsive properties between PAA and a more hydrophilic polymer, poly(acetamidoacrylic acid) (P4A), which has similar structure to that of PPA. In the case of P4A, physical gelation was not observed under similar conditions to those at PPA gelation. This result indicates that hydrophobic interaction among the alkyl groups at one of the polymer side-chains is necessary for the gelation. Dynamic viscoelasticity measurements of these aqueous polymer solutions by use of a rotation rheometer gave quantitative data such as the complex viscosity and the storage and loss moduli, which strongly depended on the solution composition. It is concluded that both hydrophobic interaction among alkyl groups and ionic crosslinking by calcium ion play an important role for the gelation. The drastic change in the rheological property indicates that the sol-gel transition of PPA solution can be successfully controlled by adjusting the temperature and concentration of each component. The controllable rheological property is expected to be useful for various applications, especially in the biomedical field.
机译:在氯化钙(CaCl_2)存在下,研究了水(2-丙氨酸脒丙烯酸)(PPA)溶液的热反应性质。 PPA溶液的浊度和粘度依赖于聚合物和盐的温度和浓度。例如,在相对高浓度的CaCl_2存在下,透明PPA溶液在高于浊点高于浊点的温度下变为浊度凝胶。通过比较PAA和更亲水性聚合物的热响应性能,聚(乙酰氨基甲酸)(P4A)与PPA类似的结构,考虑物理凝胶机制。在P4A的情况下,在类似条件下未观察到PPA凝胶化的物理凝胶化。该结果表明,聚合物侧链中的烷基之间的疏水相互作用是凝胶化所必需的。通过使用旋转流变仪产生这些含水聚合物溶液的动态粘弹性测量,所述旋转流变仪产生了诸如复杂粘度和储存和损失模量的定量数据,该数据强烈地依赖于溶液组合物。结论是,烷基之间的疏水性相互作用和通过钙离子的离子交联在凝胶化作用的重要作用。流变性质的激烈变化表明,通过调节每种组分的温度和浓度,可以成功控制PPA溶液的溶胶 - 凝胶转变。预期可控的流变性能对各种应用有用,特别是在生物医学领域。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号