Electro discharge machining characteristics of Ti-6A1-4V alloy: A grey relational optimization

摘要

The paper presents the grey relational theory based parameter optimisation in electro discharge machining (EDM) of Ti-6A1-4V alloy. The multiple responses optimized are material removal rate (MRR), electrode wear rate (EWR) and surface roughness (SR). The process parameters include duty cycle, pulse current, pulse on time, electrode type and gap voltage. Experiments were conducted using Taguchi L_(18) orthogonal array. From grey relational analysis, the optimum values found are duty cycle (8%), pulse current (18 Amp), pulse on time (200 u.sec) and voltage (40 V). Experimental results revealed that the copper electrode gives the optimum performance in terms of higher MRR and lower EWR and SR. The optimized process parameters that simultaneously leading to a lower electrode wear ratio and higher material removal rate are then verified through a confirmation experiment.