CONSTRUCTION AND FIRST TESTS OF THE NEW INJECTION SYSTEM FOR THE LINAC II AT DESY

摘要

For the Linac II, which supplies the accelerator chain at DESY with electrons and positrons, a new injection system has been built. It is supposed to ensure reliable operation and to avoid the beam loss of about 60% at energies up to 400 MeV and the associated activation. The function of the injector components, the entire injection system and the acceleration in the linac sections were optimized in simulations. The main components are a 6 A/100 kV triode gun, buncher and a dispersive section for energy collimation. The output energy is 5 MeV and the beam pulse length is 5 ns to 50 ns. The new buncher structure is a hybrid of a standing wave and traveling wave structure and allows a compact design and good electron capture. Its main part is a traveling wave structure in 2π/3 mode, to which one capture cell is coupled in π mode. One of two assembled structures has been tuned and completed a test rig in the linac tunnel. In this test system detailed analysis of its properties is in progress as well as minor corrections like alignment and improvements of reliability. The final installation is going to take place from September 2013. First experimental analysis compared to simulation results will be presented.