Multi Quality Characteristics Of WEDM Process Parameters With RSM

摘要

Wire electric discharge machine (WEDM) is a spark erosion non conventional machining method to cut hard and conductive material with the help of a wire electrode. High strength low alloy steel (HSLA) is a hard alloy with high hardness and wear resisting property. The purpose of this study is to investigate the effect of parameters on metal removal rate for WEDM using HSLA as work-piece and brass wire as electrode. HSLA used in cars, trucks, cranes, bridges, roller coasters and other structures that are designed to handle large amounts of stress. It is observed that metal removal rate and surface roughness increases with increase in pulse on time and peak current. Metal removal rate and surface roughness decreases with increase in pulse off time and servo voltage. Wire mechanical tension has no significant effect on metal removal rate and surface roughness. Response Surface methodology (RSM) is used to optimize the process parameter for metal removal rate and surface roughness. Response Surface Methodology is formulating a mathematical model which correlates the independent process parameters with the desired metal removal rate and surface roughness. The central composite rotatable design (CCRD) has been used to conduct the experiments.