Formation of Alumina Inclusions during Counter Diffusion of Aluminum and Oxygen Dissolved in Molten Iron

摘要

The formation of alumina (Al_2O_3) inclusions was experimentally investigated with the capillary-reservoir method. The inclusions were observed with a SEM (scanning electron microscope). The compositions of iron matrix and inclusion were measured with an EDX (energy dispersive X-ray analysis). The content profile of aluminum was discussed by the counter-diffusion model of aluminum and oxygen with an instantaneous irreversible reaction for alumina formation. The inclusions of spherical and polygonal alumina and spherical hercynite (FeOAl_2O_3) were observed in the vicinity of the diffusion front of aluminum. The hercynite was detected when the initial oxygen content was 0.075 mass% and higher. When the initial oxygen content was more than 0.045 mass% and higher, dendritic alumina formed at the position that was nearer to the interface than the position of spherical and polygonal inclusions. No inclusion was observed around the interface because of the re-dissolution of the inclusions. The initiating position of the inclusion formation was approximated by the reaction position, Z_r, obtained from the model on the assumption that aluminum and oxygen contents at the reaction position were zero. Empirically, 0.9×Z_r and 0.17×Z_r expressed the initiating positions of formation and re-dissolution of inclusions respectively. The critical supersaturation ratio was estimated to be from 1 to 7.4×10~5, depending on the initial aluminum and oxygen contents.