Mercerization treatment conditions effects on kenaf fiber bundles mean diameter variability

摘要

The interest in utilizing natural fiber as reinforce in polymer composites has increased in recent years due to their advantages like availability, cheap, renewable, lightweight, and biodegradable. However, the main challenge of natural fiber to be used as reinforcement in polymer is their hydrophobic nature. One of the solutions is via chemical modification like mercerization treatment. In this study, the effect of alkali concentrations at 2 and 10 w/v%; and soaking temperature at 30°C and 80°C on a kenaf fiber bundles mean diameter was investigated. Untreated kenaf fiber was used as a control unit. Kenaf fiber diameter was measured using a Leica video analyzer. Microstructure change of kenaf fiber before and after mercerization treatment conditions was identified using JOEL scanning electron microscopy (SEM). Finally, an interaction of alkali treatment conditions on kenaf fiber bundles mean diameter value was statistically analyzed using a commercially available statistical software package. The results showed that kenaf fiber bundle mean diameter was reduced by 30.12% to 42.92% after mercerization treatment. From analysis of variance, the main effect of alkali concentration value was 6.075 and the temperature value was 1.135. The main effect plots reveal that alkali concentration had a higher impact on mean diameter changes compared to soaking temperature factor.