首页> 外文会议>International Conference on Measurement, Instrumentation and Automation >Surface reconstruction method by photometric stereovision based on Oren-Nayar's model
【24h】

Surface reconstruction method by photometric stereovision based on Oren-Nayar's model

机译:基于Oren-Nayar模型的光度立体宽度表面重建方法

获取原文

摘要

This article proposes a surface reconstruction method by photometric stereovision based on Oren-Nayar's model. The classical photometric stereovision reconstructs the surface by the exploitation of Lambert's model. However Lambert's model does not take into account the complex geometric and radiometric phenomena such as masking, shadowing and inter-reflections between micro-facets on the surface. Thus this article will improve the photometric stereovision by using Oren-Nayar's model instead of Lambert's model. The photometric stereovision based on Oren-Nayar's model will calculate respectively the energies attenuated by the phenomena of masking, shadowing and the energies produced by the phenomenon of inter-reflections. At last, the surface reconstruction experiments show that the result obtained by this method is more precise than the one obtained by classical photometric stereovision.
机译:本文通过基于oren-Nayar模型的光度立体透视提出了表面重建方法。经典的光度立体宽度通过利用Lambert模型来重建表面。然而,Lambert的模型不考虑复杂的几何和辐射数现象,例如掩蔽表面之间的微面部之间的遮蔽,阴影和反射互连。因此,本文将通过使用Oren-Nayar的模型而不是Lambert模型来改善光度立体宽度。基于oren-Nayar模型的光度立体孔径将分别通过掩蔽,阴影和由反射帧间的现象产生的能量减弱的能量。最后,表面重建实验表明,通过该方法获得的结果比经典光度计立体宽度所获得的更精确。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号