首页> 外文会议>International Science, Social Science, Engineering and Energy Conference >Design and Preparation of Synthetic Hydrogels Via Photopolymerisation for Biomedical Use as Wound Dressings
【24h】

Design and Preparation of Synthetic Hydrogels Via Photopolymerisation for Biomedical Use as Wound Dressings

机译:通过光聚合的生物医学用途作为伤口敷料的合成水凝胶的设计与制备

获取原文

摘要

This research is concerned with the design and preparation of synthetic hydrogels for biomedical use as wound dressings. Crosslinked polymers of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and its sodium salt (Na-AMPS) were prepared via free radical polymerization in aqueous solution using photoinitiation. An initial Na-AMPS monomer concentration of 40% w/v was used, then 1.0% by mole of monomer N,N'-methylene-bis-acrylamide (NMBA) was added as a crosslinking agent together with 0.1% by mole of 4,4-azo-bis(4-cyanopentanoic acid) as photoinitiator. The results showed that the hydrated hydrogel sheets were good coherency, transparency, flexibility, high oxygen permeability and good skin adhesion. The water properties of the hydrogel sheets (absorption, retention, water vapour transmission rate) were balanced which can keep moist environment for the wound. In addition, it was shown that the UV radiation is a powerful tool for producing hydrogels, it is considered that these photopolymerised Na-AMPS-based hydrogels show considerable potential for biomedical use as wound dressings.
机译:该研究涉及为生物医学用途作为伤口敷料的合成水凝胶的设计和制备。使用光素聚合在水溶液中通过自由基聚合制备2-丙基丙酰胺-2-甲基丙烷磺酸(AMPS)的交联聚合物及其钠盐(NA-AMPS)。使用初始Na-AMPS单体浓度为40%w / v,然后将1.0%通过摩尔单体N,N'-亚甲基 - 双丙烯酰胺(NMBA)作为交联剂加入与0.1%的摩尔4 ,4-偶氮二(4-氰基戊酸)作为光引发剂。结果表明,水凝胶板是良好的相干性,透明度,柔韧性,高氧气渗透性和良好的皮肤粘附性。水凝胶板(吸收,保留,水蒸气透射率)的水性平衡,可以保持伤口的潮湿环境。另外,表明紫外线辐射是生产水凝胶的强大工具,认为这些光聚合的Na-AMPS基水凝胶显示为伤口敷料的生物医学用途的相当大的潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号