Reliability analysis on the repaired shaft project based on an improved response surface method

摘要

In order to analyze the reliability and failure probability of the repaired shaft engineering, this article makes fail-safe analysis and instability risk prediction of the shaft engineering. A reliability analysis method was applied combining the improved response surface method which has improved sample points' selection based on the traditional response surface method to decreasing the number of the structural analysis under the premise of the accuracy of the calculated results with numerical simulation. The limit state whose failure criteria was safe factor was constructed to analyze the reliability of the repaired shaft engineering, the reliability index of the repaired shaft engineering was computed by JC method. The results show the reliability index value of the repaired shaft engineering is 3.1127 slight fewer than design objective value and it's failure probability value is 0.0929%, which show that the repaired shaft is stable and it's deformation should be monitored to ensure it is safety application because of it is reliability index value slight fewer than design objective value.