首页> 外文会议>International Conference on Chemical Engineering and Advanced Materials >Synthesis and characterization of aluminum nitride ceramic coating on aluminum alloy by plasma electrolytic oxidation in CO(NH_2)_2 electrolyte
【24h】

Synthesis and characterization of aluminum nitride ceramic coating on aluminum alloy by plasma electrolytic oxidation in CO(NH_2)_2 electrolyte

机译:CO(NH_2)_2电解质等离子电解氧化铝合金铝合金氮化物陶瓷涂层的合成与表征

获取原文

摘要

aluminum nitride ceramic coating were obtained on LY12 aluminum alloy by plasma electrolytic oxidation in CO(NH_2)_2 electrolyte. The microstructure of the ceramic coating including phase and elements composition, surface and cross section morphology were investigated. The properties of the ceramic coatings such as surface roughness, thickness and bonding strength were primarily studied. The results show that the ceramic coating on LY12 aluminum alloy surface was AlN coating with the thickness of 12μm. The AlN ceramic coating showed rough and porous. The average diameter of the pores was 6μm and the surface roughness was 1.5μm. The bonding strength of the coating was 18±2 MPa.
机译:通过CO(NH_2)_2电解质中的等离子体电解氧化在Ly12铝合金上获得氮化铝陶瓷涂层。研究了包括相和元素组成,表面和横截面形态的陶瓷涂层的微观结构。主要研究了陶瓷涂层的性质,例如表面粗糙度,厚度和粘合强度。结果表明,LY12铝合金表面上的陶瓷涂层是AlN涂层,厚度为12μm。 Aln陶瓷涂层显示粗糙和多孔。孔的平均直径为6μm,表面粗糙度为1.5μm。涂层的粘合强度为18±2MPa。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号