首页> 外文会议>International Conference on Chemical Engineering and Advanced Materials >Preparation of NaA/PTFE Composite Membrane for Separation of DMF/H_2O Mixture by Pervaporation
【24h】

Preparation of NaA/PTFE Composite Membrane for Separation of DMF/H_2O Mixture by Pervaporation

机译:NAA / PTFE复合膜的制备,通过渗透流离DMF / H_2O混合物

获取原文

摘要

The NaA/PTFE composite membranes were synthesized on polytetrafluoroethylene (PTFE) film by hydrothermal secondary growth (HSG) method and scratching (ST) method. The structure and morphology were characterized by XRD and SEM. The pervaporation(PV) performance of NaA/PTFE composite membranes were evaluated with dimethylformamide (DMF)Avater mixtures. The XRD results showed that NaA/PTFE composite membranes kept the zeolite crystal feature of A type. The substrate, PTFE and zeolite were firmly combined together by the SEM photos. The results of PV showed that the flux and the separation factor of NaA/PTFE composite membrane prepared by HSG method with 4 crystallization times were 0.54 kg/m~2 h and 23, respectively. The flux of NaA/PTFE composite membrane prepared by ST method was much larger than that of NaA/PTFE composite membrane prepared by HSG method, but separation factor was lower.
机译:通过水热次级生长(HSG)方法和刮擦(ST)方法在聚四氟乙烯(PTFE)膜上合成NAA / PTFE复合膜。结构和形态的特点是XRD和SEM。用二甲基甲酰胺(DMF)Avater混合物评价NAA / PTFE复合膜的渗透蒸发剂(PV)性能。 XRD结果表明,NAA / PTFE复合膜保持型沸石晶体特征。 SEM照片牢固地将底物,PTFE和沸石牢固地组合在一起。 PV的结果表明,通过HSG方法制备的NaA / PTFE复合膜的助熔剂和4个结晶时间为0.54kg / m〜2 h和23。通过ST方法制备的NAA / PTFE复合膜的通量远大于通过HSG法制备的NAA / PTFE复合膜的通量,但分离因子较低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号