首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Study on the Rheological Properties and Shear Model for Magneto-rheological Fluids
【24h】

Study on the Rheological Properties and Shear Model for Magneto-rheological Fluids

机译:磁流变液流变性能和剪切模型研究

获取原文

摘要

In this paper, the influence of the soft magnetic particle content on the properties of MRFs is studied. Besides, the relationships between the shear stress of MRFs and the magnetic induction intensity, the soft magnetic particle content, and the shear rate are discussed. The curve equation that expresses the relationship between the shear stress, the magnetic induction intensity, and the soft magnetic particle content is established through the fitting of experimental data. The results show that the shear stress of MRFs increases with increasing magnetic induction intensity and that the shear stress will tend to stabilise when the magnetic induction intensity reaches a sufficient value. The validity of the Bingham model and the H-B model for describing the relationship between the shear stress and shear rate is established, and the phenomenon of shear thinning of MRFs can be better represented by the H-B model than by the Bingham model.
机译:本文研究了软磁颗粒含量对MRFS性能的影响。 此外,讨论了MRFS的剪切应力与磁感应强度,软磁颗粒含量和剪切速率之间的关系。 表示通过实验数据的拟合建立剪切应力,磁感应强度和软磁颗粒含量之间关系的曲线方程。 结果表明,MRFS的剪切应力随着磁感应强度的增加而增加,并且当磁感应强度达到足够值时,剪切应力将趋于稳定。 建立了Bingham模型的有效性和用于描述剪切应力和剪切速率之间的关系的H-B模型,并且MRFS的剪切变薄现象可以由H-B模型代表而不是Bingham模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号