首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Impact of sterilization methods on the stability of silk fibroin solution
【24h】

Impact of sterilization methods on the stability of silk fibroin solution

机译:灭菌方法对丝素蛋白溶液稳定性的影响

获取原文

摘要

Different sterilization techniques such as Co(60) gamma irradiation and autoclaving were used to treat the regenerated Bombyx mori silk fibroin (RSF) in aqueous solutions. The effect of the two above mentioned sterilization methods on the conformational changes and gelation rate of RSF was studied. According to the analysis of circular dichroism spectroscopy, gamma irradiation may initiate the conformational transition from random coil to β-sheet for RSF, while autoclaving shows less significant influence on the structure changes of RSF in aqueous solutions. The results also indicate that gelation time decreased to 5 days after γ-irradiation treatment while gelation time increased to 31 days after autoclave treatment. Moreover, particles of RSF in solutions changed larger and gelation time increased when autoclaving treatment time extended. However, no detectable changes of RSF secondary structure were found investigated by XRD and FTIR. Which indicated that under both sterilization methods, the RSF structure was transformed from random coil to β-sheet structure after gelation.
机译:不同的灭菌技术,如CO(60)γ辐射和高压灭菌,用于在水溶液中处理再生的BOMBX MORI丝素蛋白(RSF)。研究了两个上述灭菌方法对RSF的构象变化和凝胶化率的影响。根据圆二色光谱的分析中,γ辐射可以发起从无规卷曲到β折叠为RSF的构象转变,而高压灭菌示出RSF的在水溶液中结构的变化少显著影响。结果还表明γ-辐照处理后凝胶化时间降至5天,而凝胶化时间在高压灭菌处理后31天。此外,当延长的高压灭菌治疗时间延伸时,溶液中RSF的颗粒变化较大并且凝胶化时间增加。然而,发现XRD和FTIR研究了RSF二级结构的可检测变化。这表明在灭菌方法下,在凝胶化之后从随机线圈转变为β-片状结构的RSF结构。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号