首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Effects of mesh density on LES of the flow structure in internal combustion engine
【24h】

Effects of mesh density on LES of the flow structure in internal combustion engine

机译:网眼密度对内燃机流动结构的影响

获取原文

摘要

By using the software FIRE, the flow structure of 186FA diesel engine were analyzed by numerical simulation. The indicator diagram, velocity field and turbulent kinetic energy in the cylinder were simulated by both the k - ε model and the large-eddy simulation(LES) model. The results shows that the mesh density has little effect on the flow structure when the k - ε model is adopted. Compared with the k - ε model, the LES model shows a significantly different and relatively more complex turbulence structure, and its turbulent kinetic energy is much lower than that of the latter. At the same time, the finer the mesh is, the more distinct the effect is.
机译:通过使用软件火灾,通过数值模拟分析了186FA柴油发动机的流动结构。通过K-ε模型和大涡模拟(LES)模型模拟​​圆柱体中的指示图,速度场和湍流动能。结果表明,当采用K-ε模型时,网状密度对流动结构几乎没有影响。与K - ε模型相比,LES模型显示出显着不同和相对更复杂的湍流结构,其湍流动能远低于后者的动能。同时,网格越精细,效果越明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号