首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Tribological characteristics of Si_3N_4-hBN ceramic materials for dry application
【24h】

Tribological characteristics of Si_3N_4-hBN ceramic materials for dry application

机译:Si_3N_4-HBN陶瓷材料的摩擦学特性干燥施用

获取原文

摘要

.Using air lubricants, wear tests of Si_3N_4-hBN composites with different hexagonal boron nitride (hBN) volume fraction sliding against Si_3N_4 ceramic were carried out on a MMU-5G type pin-on-disc tester. For comparison, Si_3N_4/Si_3N_4 pairs were also tested under the same conditions. The worn surfaces of specimens were observed under scanning electron microscope (SEM). Furthermore, the wear debris were analyzed by using X-ray diffraction (XRD). Wear debris layers are formed on the wearing surface when Si_3N_4-hBN composites slide against Si_3N_4 ceramic under air lubrication. In this situation, the friction coefficients are as high as 0.80-1.20 and the wear coefficients are above 10~(-5) mm~3/Nm for all materials tested.
机译:在MMU-5G型销托盘测试仪上进行空气润滑剂,具有不同六边形氮化物(HBN)体积分数的Si_3N_4-HBN复合材料的磨损试验,在MMU-5G型引脚盘测试仪上进行抗Si_3N_4陶瓷。为了比较,在相同的条件下也测试了Si_3N_4 / Si_3N_4对。在扫描电子显微镜(SEM)下观察样品的破旧表面。此外,通过使用X射线衍射(XRD)分析磨损碎片。当Si_3N_4-HBN复合材料在空气润滑下滑动Si_3N_4陶瓷时,在磨损表面上形成磨损碎片层。在这种情况下,摩擦系数高达0.80-1.20,并且所有材料的磨损系数高于10〜(-5)mm〜3 / nm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号