首页> 外文会议>Asia-Pacific drying conference >PROBING THE PARTICLE FORMING BEHAVIOUR OF DHA CONTAINING EMULSION DROPLETS USING A SINGLE DROPLET DRYING DEVICE
【24h】

PROBING THE PARTICLE FORMING BEHAVIOUR OF DHA CONTAINING EMULSION DROPLETS USING A SINGLE DROPLET DRYING DEVICE

机译:用单滴干燥装置探测含DHA乳液液滴的颗粒形成行为

获取原文

摘要

Spray drying is a primary method for manufacturing food powders today.Before subjecting a new formulation to this process, information about drying kinetics and shrinkage parameters, which are crucial to model the spray drying process, can be obtained through single-droplet drying experiments. The single droplet drying rig is specially designed to allow accurate measurement of droplet size, weight, and temperature during drying.In this study, the glass filament method (Lin and Chen, 2002; Lin and Chen, 2004) was implemented to measure the above-mentioned three parameters of emulsion liquid droplets (containing DHA oil) with different shell materials (protein-based and starch-based, respectively) at specific solid-liquid ratios under air convection.Even though there are many reported works on DHA microencapsulation, there has been a lack of fundamental information of the processes.It was found that the weight and size of the droplets decreased sharply due to water evaporation, while the droplets temperature remained at a wet-bulb like temperature.While the moisture content of the droplet continued to decrease as drying proceeded, the transfer of moisture within the droplet/particle became restricted by the solid matrix formed.In the meantime, the droplet temperature gradually approached the air temperature as drying continued while the diameter and weight each reached a plateau.Based on these data, the Reaction Engineering Approach (REA) (Chen and Xie, 1997; Patel & Chen, 2008; Chen, 2008) could be adopted to describe the drying behaviour of encapsulated DHA droplet. The shrinkage coefficients were obtained and correlated against the solids content.Discussion based on visual observations on the emulsion morphologies and droplet drying behaviours are presented. This study is a start of a series of fundamental investigations aiming to understand the drying behaviour in relation to particle functionality of encapsulated DHA particles.
机译:喷雾干燥是本前制造食物粉末的主要方法。通过单液滴干燥实验,可以通过单滴干燥实验来获得对该过程的新配方进行新配方。单滴干燥器专门设计用于在干燥过程中精确测量液滴尺寸,重量和温度。本研究,实施了玻璃丝法(林和陈,2002; Lin和Chen,2004)以衡量上述 - 在空气对流下的特定固液比下,在空运下的特异性固体液体比(蛋白质和淀粉基)的乳液液滴(含DHA油)的三个参数。虽然有许多报告的DHA微胶囊综合作用一直缺乏对过程的基本信息。发现液滴的重量和尺寸由于水蒸发而急剧下降,而液滴温度保持在湿灯泡,如温度。液滴的水分含量继续为了减少干燥进行,液滴/颗粒内的水分转移变为由所形成的固体基质的限制。同时,液滴温度逐渐变化将空气温度接近,随着持续的,而且每次达到平台的直径和重量。基于这些数据,反应工程方法(Rea)(陈和谢,1997; Patel&Chen,2008;可以采用陈,2008)来描述包封的DHA液滴的干燥行为。获得收缩系数并与固体含量相关。基于对乳液形态的视觉观察,提出了液滴干燥行为的探讨。本研究是一系列基本调查的开始,旨在了解与包封的DHA颗粒的颗粒官能团相关的干燥行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号