Study on Effects of rolling temperature and cooling velocity on organization and properties of T700

机译：轧制温度和冷却速度对T700组织及性能影响的研究

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Effect of rolling temperature and cooling velocity on organization properties of T700 and the working load of the coiler was investigated with Gleeble-3800 Thermal/Mechanical Simulator. The results of this experiment show that the working load of the rolling machine will be increase with the reduction of the rolling temperature. The best rolling temperature is 550～600°C and the best holding time after rolling is one hour.

机译：采用GLEEBLE-3800热/机械模拟器研究了T700的组织性能对T700的组织性能的影响，以及卷取器的工作载荷。该实验的结果表明，随着轧制温度的降低，轧机的工作负荷将增加。最佳轧制温度为550〜600°C，轧制后的最佳保持时间为1小时。

著录项

来源
《International Conference on Information Science, Automation and Material System》|2011年||共4页
会议地点
作者
ZhuoFei Song; Ming Geng; YunLi Feng; RunMing Feng;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TB3-53;
关键词
T700; Rolling temperature; Holding time;

机译：T700;轧制温度;持有时间;

相似文献

外文文献
中文文献
专利

1. Combined effects of high-temperature rolling and ultrafast cooling on the mechanical properties of low-carbon steel [J] . Yao S. J., Liu H. T., Sun L., Materials and Manufacturing Processes . 2017,第9a12期

机译：高温轧制和超快冷却对低碳钢力学性能的综合影响
2. EFFECT OF SEMIFINISHED ROLLED PRODUCT COOLING RATE DURING CONTROLLED ROLLING ON THE CONDITION OF MICROALLOYED STEEL HOT-WORKED AUSTENITE, FINAL MICROSTRUCTURE, AND MECHANICAL PROPERTIES. PART 2. STUDY OF THE EFFECT OF SEMIFINISHED ROLLED PRODUCT COOLING RATE ON FERRITE-BAINITE STRUCTURE FORMATION [J] . Yu. D. Morozov, I. F. Pemov, E. A. Goli-Oglu, Metallurgist . 2012,第1a2期

机译：轧制过程中半成品轧制速度对微合金钢热加工奥氏体状态，最终组织和机械性能的影响。第2部分。半成品轧制速度对铁素体-贝氏体组织形成的影响研究
3. EFFECT OF SEMIFINISHED ROLLED PRODUCT COOLING RATE DURING CONTROLLED ROLLING ON THE CONDITION OF MICROALLOYED STEEL HOT-WORKED AUSTENITE, FINAL MICROSTRUCTURE, AND MECHANICAL PROPERTIES. Part 1. Study of the Effect of Semifinished Rolled Product Cooling Rate on Ferrite-Pearlite Microstructure Formation [J] . Yu. D. Morozov, I. F. Pemov, E. A. Goli-Oglu Metallurgist . 2012,第11a12期

机译：轧制过程中半成品轧制速度对微合金钢热加工奥氏体状态，最终组织和机械性能的影响。第1部分。轧制半成品冷却速率对铁素体-珠光体微结构形成的影响的研究
4. Study on Effects of Rolling Temperature and Cooling Velocity on Organization and Properties of T700 [C] . ZhuoFei Song, Ming Geng, YunLi Feng, International Conference on Information Science, Automation and Material System . 2013

机译：研究轧制温度和冷却速度对T700组织及性质的影响
5. The Properties of Metals: A Study of the Influence of Time Effects on the Tensile Strength at High Temperatures [D] . Clark, Alexander Sievewright. -1

机译：金属的特性：高温下时间效应对拉伸强度的影响研究
6. Effects of cooling temperatures and low pH on membrane properties and voltage-dependent currents of rat nociceptive-like trigeminal ganglion neurons [O] . Viacheslav Viatchenko-Karpinski, Jianguo G Gu 2018

机译：冷却温度和低pH对大鼠伤害性三叉神经节神经元膜特性和电压依赖性电流的影响
7. Effects of Controlled Rolling and Controlled Cooling on the Mechanical Properties of 550MPa Grade Engineering Mechanism Steel [O] . Tao Xiong, Yi Xiao, Shisen Wang, 2016

机译：控制轧制和控制冷却对550mpa级工程机械钢力学性能的影响
8. The Effect of Cooling Rate After Rolling,Deformation After the Hold and Finish Rolling Temperature on the Mechanical Properties and Microstructure of a C/Mn/Si/Nb Steel, [R] . mitchell, p. s. irani, r. c. 1977

机译：轧制后冷却速度，保持后变形和终轧温度对C / mn / si / Nb钢力学性能和显微组织的影响，

Study on Effects of rolling temperature and cooling velocity on organization and properties of T700

摘要

著录项

相似文献

相关主题

期刊订阅