首页> 外文会议>International Conference on Advanced Engineering Materials and Technology >Transverse superplastic deformation of laser welded Ti-6Al-4V sheet
【24h】

Transverse superplastic deformation of laser welded Ti-6Al-4V sheet

机译:激光焊接Ti-6AL-4V板横向超塑性变形

获取原文

摘要

Uni-axial hot tensile tests were used to investigate the transverse superplastic deformation of laser welded Ti-6Al-4V sheet. Microstructures of the weld bead before and after superplastic deformation were observed by optical microscope. The maximal deformation of 46% was obtained on weld joint at strain rate of 10-2s-1 and temperature of 1173K. A coefficient K was introduced to evaluate the non-uniform deformation of weld joint. After superplastic deformation the microstructure of weld bead transformed into lamellas from original acicular structure.
机译:Uni-轴向热拉伸试验用于研究激光焊接Ti-6Al-4V片材的横向超塑性变形。光学显微镜观察到过度塑性变形前后焊接珠的微观结构。在焊接接头处以10-2s-1的焊接率和1173k的温度获得的最大变形为46%。引入系数k以评估焊接接头的不均匀变形。超塑性变形后,焊珠的微观结构从原始针状结构转换成薄片。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号