首页> 外文会议>International Conference on Digital Manufacturing Automation >Study on Load Bearing Capacities of Single Pile And Single Pile with Cap
【24h】

Study on Load Bearing Capacities of Single Pile And Single Pile with Cap

机译:用盖帽的单桩和单桩承载能力研究

获取原文

摘要

To determine the bearing characteristic value of loading transfer, we investigated the bearing capacities of single pile and single pile with cap. The main results were shown as followed: The axial force attenuated slowly because of the effect of the rigid cap of single pile; The load on pile top was decreased along with the raise of the total load; For the presence of the cap, the distribution of axial force became gentle and the lateral friction resistance was decreased, meanwhile the pile end bearing was increased greatly. To conclude, the settlement value of the single with cap was more than that of the single pile.
机译:为了确定装载转移的轴承特性值,我们研究了单桩和盖子的轴承容量。主要结果如下所示:由于单桩刚性帽的效果,轴向力慢慢减弱;桩顶上的负荷随着总负荷的累积而减少;对于帽的存在,轴向力的分布变得温和,横向摩擦阻力降低,同时桩端轴承大大增加。为了得出结论,单个帽的沉降值超过单桩。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号