首页> 外文会议>International Conference of Environment Materials and Environment Management >Synthesis of Ordered Mesoporous TiO_2 by Hydrolysis Condensation with Block Copolymer P123 as Template
【24h】

Synthesis of Ordered Mesoporous TiO_2 by Hydrolysis Condensation with Block Copolymer P123 as Template

机译:用嵌段共聚物P123作为模板用嵌段共聚物P123的水解凝结合成有序的介孔TiO_2

获取原文

摘要

Highly ordered mesoporous TiO_2 was synthesized by a hydrolysis condensation process using block copolymer P123 as the template and tetrabutyl orthotitanate (TBOT) as titanium precursor. The influences of the synthesis parameters including the volume of solvent, the ratio of the template to TBOT and reaction pH on the structure were investigated. The structure properties of the products were characterized with low-angle XRD, FT-IR, N_2 adsorption-desorption analysis. The results showed that the amount of solvent played a decisive role for the formation of ordered pore structure. The proper hydrolysis pH is in neutral and acidic range. The template can be removed totally by Soxhlet extraction with ethanol and the mesoporous structure can be retained perfectly by this template removal method. The product has the BET surface area of 266.5m~2/g and a narrow pore distribution with a peak at 4.34 nm.
机译:通过使用嵌段共聚物P123作为钛前体的模板和四丁基二丁酯(TBOT)通过水解缩合工艺合成高度有序的介孔TiO_2。研究了包括溶剂体积的合成参数的影响,模板与TBOT和反应pH的结构的比率进行了研究。产品的结构性质具有低角度XRD,FT-IR,N_2吸附 - 解吸分析。结果表明,溶剂量为形成有序孔隙结构的形成作用了决定性作用。适当的水解pH是中性和酸性的范围。通过Soxhlet萃取可以通过乙醇萃取完全除去模板,并且可以通过该模板去除方法完美地保留介孔结构。该产品的BET表面积为266.5m〜2 / g,孔分布窄,峰值为4.34nm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号