A scalable multi-chip architecture to realise large format microshutter arrays for coded aperture applications

摘要

Coded aperture imaging has been used for astronomical applications for several years. Typical implementations used a fixed mask pattern and are designed to operate in the X-Ray or gamma ray bands. Recently applications have emerged in the visible and infra red bands for low cost lens-less imaging systems and system studies have shown that considerable advantages in image resolution may accrue from the use of multiple different images of the same scene — requiring a reconfigurable mask. Previously we reported on the realization of a 2x2cm single chip mask in the mid-IR based on polysilicon micro-opto-electro-mechanical systems (МОЕМ) technology and its integration with ASIC drive electronics using conventional wire bonding. The MOEMS architecture employs interference effects to modulate incident light - achieved by tuning a large array of asymmetric Fabry-Perot optical cavities via an applied voltage and uses a hysteretic row/column scheme for addressing. In this paper we present the latest transmission results in the mid-IR band (3-5μm) and report on progress in developing a scalable architecture based on a tiled approach using multiple 2 x 2cm MOEMS chips with associated control ASICs integrated using flip chip technology. Initial work has focused on a 2 x 2 tiled array as a stepping stone towards an 8 x 8 array.