Graphite-Nimonic alloy brazing

摘要

A graphite sheet has been successfully brazed to a Nimonic 105 superalloy using a commercial TiCuSil paste. A chromium layer was deposited on the graphite surface by sputtering and controlled heat treatments were employed in order to develop a suitable microstructure. Scanning electron microscopy measurements showed rough, crack-free interfaces between the filler metal and both the graphite and nimonic parts. From metallographic examination a well defined layered structure of the metallic elements close to the filler/graphite interface has been found. The metallic elements transport from the interface to the carbon bulk where they fill all the graphite pores up to a depth up of 50μm and form a layered structure within the pores.