首页> 外文会议>International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure Properties - Nanodiffusion and Nanostructured Materials >Formation and Decomposition of Sol-Gel Synthesized Aluminum Titanate Nano Powders at the Presence of Fe_2O_3 Additive
【24h】

Formation and Decomposition of Sol-Gel Synthesized Aluminum Titanate Nano Powders at the Presence of Fe_2O_3 Additive

机译:在Fe_2O_3添加剂存在下,溶胶 - 凝胶合成铝钛纳米粉末的形成和分解

获取原文

摘要

Full formation of aluminum titanate compound at low temperatures was obtained by sol-gel method. With addition of various amount of Fe_2O_3 additive to tialite composition formation and decomposition of tialite phase have been investigated. X-ray diffraction (XRD), simultaneous thermal analysis (STA) and scanning electron microscopy (SEM) analysis showed that the formation of nano tialite at low temperatures (around 950°C) was improved at the presence of additive and decomposition rate of aluminum titanate to α-Al_2O_3 and TiO_2 (Rutile) in sample with 5%wt Fe_2O_3 was controlled with formation of Al_2TiO_5-Fe_2TiO_5 solid solution.
机译:通过溶胶 - 凝胶法得到在低温下全部形成钛酸铝化合物。除了向三角岩组合物中添加各种量的Fe_2O_3添加剂,已经研究了三角形相的分解。 X射线衍射(XRD),同时热分析(STA)和扫描电子显微镜(SEM)分析表明,在铝的添加和分解率的存在下,改善了在低温下在低温下形成纳米三角部(约950℃)控制钛酸盐,用5%wt Fe_2O_3的样品中的α-Al_2O_3和TiO_2(金红石),形成Al_2TiO_5-Fe_2TiO_5固溶体。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号