LBW of Similar and Dissimilar Skin-Stringer Joints - Part II: Electrochemical Characterization

摘要

The durability of metal structures depends most upon the corrosion behaviour of its materials as well as the on the electrochemical behaviour of joints and the technology employed to construct the joints itself. This work describes the effect of Laser Beam Welding (LBW) technology on the electrochemical and corrosion behaviour of parent materials and bead of several aluminium alloy joints. Investigation was carried out by using dc electrochemical techniques (open circuit potential monitoring, OCP, and anodic polarization) on selected micro areas of parent materials and bead by means of a suitable electrochemical microcell. With regards to the corrosion behaviour of heat affected zone (HAZ), no data has been presented due to the small area of HAZ when compared to the microcapillary area adopted in this study. Alloys investigated in this work are the AA 2139 and AA 6156 as skin in the form of rolled sheets, and AA 2139 and PA 765 as stringer, in form of extruded parts. In addition, the AA 4047 has been used as filler material in form of wire.