A comparison between different advanced oxidation processes for the remediation of PCP contaminated wastewaters

摘要

In this paper a comparison between different advanced oxidation processes (AOP), for the remediation of a wastewater contaminated with 100 mg/l of pentachlorophenol (PCP), is proposed. The AOP chosen were: Fenton or Fenton-like reactions in which the soluble iron catalyst salt was added as Fe(II) or Fe(III) or a mixture of Fe(II) and Fe(III), and ozonation. In the latter case the effects of the presence of a solid iron oxide (hematite) were also evaluated. For the Fenton's reactions, the investigated parameters were: pH (from pH=1.5 to pH=5), reaction time, H_2O_2/PCP ratio (from 5/l to 20/l), Fe/H_2O_2 ratio (from 0 to 2/l) and the effect of a H_2O_2 stabilizer: KH_2PO_4. The highest TOC removal (75%) was reached, using stabilized H_2O_2 and Fe(II), when H_2O_2/PCP=5/l and Fe/H_2O_2=1/l; in this case, dechlorination was 96% and KH_2PO_4 increased H_2O_2 lifetime significantly. Fe(III) or the mixture of Fe(II) and Fe(III), proved to be more efficient than Fe(II) when H_2O_2/PCP<15/l and Fe/H_2O_2<1/l. For ozonation the effects of pH and of the ratio between airflow and the solution's volume, were investigated. The highest efficiencies (TOC removal=35%, Cl~-release=80%) were reached when O_3=0.24 mg/l at pH=11; however diminishing the volume of treated solution, 47% TOC removal and stoichiometric Cl~- release were observed. The addition of hematite resulted in a slight increase of TOC removal and Cl~- release. By comparing the experimental results, among the tested AOP systems, Fenton's reaction proved to be the most effective for PCP remediation.