Stirred anaerobic sequencing batch reactor containing immobilized biomass: a behavior study when submitted to different fill times

摘要

The effect of the filling stage on the behavior of a mechanically stirred anaerobic sequencing batch reactor containing biomass immobilized on 1 cm polyurethane foam cubes was investigated. The reactor was made of acrylic with a capacity of 6.3 L, treating per cycle 2.5 L synthetic low-strength wastewater with a concentration of 500 mgCOD/L, at 30 ± 1°C. Eight-hour cycles (t_C) and agitation of 500 rpm were utilized. At the beginning of each cycle 60% of the wastewater volume was treated, sufficient to completely cover the bed. The remaining volume was added at different fill times (t_F) of 10,120, 240, 260 and 480 min. The results obtained showed that ratios of t_F/t_C ≤ 0.5 enabled organic matter removal higher than 75% and 70% for filtered and non-filtered samples, respectively. Ratios of t_F/t_C > 0.5, despite operation stability, resulted in loss of efficiency and formation of viscous material, similar to extra-cellular polymeric substances.