首页> 外文会议>Workshop on Advances in Control and Its Applications >Modified Model Reference Adaptive Control: Design, Analysis and perforamnce Bounds
【24h】

Modified Model Reference Adaptive Control: Design, Analysis and perforamnce Bounds

机译:修改模型参考自适应控制:设计,分析和性能债券

获取原文

摘要

Boundedness of all closed loop signals and asymptotic con-vergence of the tracking error to zero or to a residual set are the criteria that have been most commonly used to characterize the performance of model reference adaptive control schemes in the absence of persistently exciting signals. These criteria do not reveal the large transient oscilla-tions often observed in simulations and do not exclude the possibility of bursting at steady state in the presence of small modelling errors. The purpose of this paper is to address the issue of performance by using two additional criteria to assess performance in the ideal and non-ideal situations. They are the mean square tracking error criterion and the Zoo tracking error bound criterion. We use these criteria to examine the per-formance of a standard model reference adaptive controller and motivate the design of a modified scheme that can have an arbitrarily improved nominal performance in the ideal case and in the presence of bounded input disturbances. It is shown that for these cases the modified scheme can provide an arbitrarily improved zero-state transient perfoimance and an arbitrary reduction in the size of possible bursts that may occur at steady state. As in every robust control design the nominal performance has to be traded off with robust stability and therefore the improvement in performance achieved by the proposed scheme is limited by the size of the unmodelled dynamics, as established in the paper. Another expected limitation to nominal performance is sensor noise which due to space limitation is not examined here.
机译:所有闭环信号的界限和跟踪误差的渐近断开归零为零或剩余集合是最常用于在没有持续兴奋的信号的情况下表征模型参考自适应控制方案的性能的标准。这些标准没有揭示在模拟中经常观察到的大型瞬态振荡,并且不排除在存在小模型错误的情况下在稳态处爆裂的可能性。本文的目的是通过使用两个额外标准来解决绩效问题,以评估理想和非理想情况下的性能。它们是均方跟踪误差标准和动物园跟踪误差绑定标准。我们使用这些标准来检查标准模型参考自适应控制器的每种性能,并激励改进方案的设计,该方案可以在理想情况下具有任意改善的标称性能,并在存在有界输入干扰的情况下。结果表明,对于这些情况,修改方案可以提供任意改善的零状态瞬态穿孔率和可以在稳态处可能出现的可能突发的尺寸的任意减小。与在每种稳健的控制设计中一样,必须以稳定的稳定性交易标称性能,因此通过本文建立的未刻度动态所实现的性能的提高受到限制。对标称性能的另一种预期限制是由于这里没有检查空间限制的传感器噪声。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号