首页> 外文会议>ASME International Mechanical Engineering Congress and Exposition >ON THE VORTEX BREAKDOWN PHENOMENON IN HIGH ANGLE OF ATTACK FLOWS OVER DELTA WING GEOMETRIES
【24h】

ON THE VORTEX BREAKDOWN PHENOMENON IN HIGH ANGLE OF ATTACK FLOWS OVER DELTA WING GEOMETRIES

机译:关于高角度的涡流击穿现象流过三角翼几何形状的流动

获取原文

摘要

Using computational methods, an investigation was performed on the physical mechanisms leading to vortex breakdown in high angle of attack flows over delta wing geometries. For this purpose, the Second International Vortex Flow Experiment (VFE-2) 65° sweep delta wing model was studied at a root chord Reynolds number (Re_(cr)) of 6 × 10~6 at various angles of attack. The open-source computational fluid dynamics (CFD) solver OpenFOAM was used in parallel with the commercial CFD solver ANSYS FLUENT. For breadth, a variety of classic closure models were applied, including unsteady Reynolds-averaged Navier-Stokes (URANS) and detached eddy simulation (DES). Results for all cases are analyzed and flow features are identified and discussed. The results show the inception of a pair of leading edge vortices originating at the apex for all models used, and a region of steady vortical structures downstream in the URANS results. However, DES results show regions of massively separated helical flow which manifests after vortex breakdown. Analysis of turbulence quantities in the breakdown region gives further insight into the mechanisms leading to such phenomena.
机译:利用计算方法,对导致高角度涡流的涡流击穿的物理机制进行了调查流动过度触发翼几何形状。为此目的,在各种攻击角度下,在根弦雷诺数(RE_(CR))的根弦雷诺数(RE_(CR))下研究了第二次国际涡流流动实验(VFE-2)65°扫描δ翼模型。开源计算流体动力学(CFD)求解器OpenFoam与商业CFD Solver Ansys顺利使用。对于宽度,应用了各种经典的封闭模型,包括不稳定的雷诺平方体的Navier-Stokes(urans)和分离的涡流模拟(des)。分析所有病例的结果,并识别并讨论了流量特征。结果表明,对于所有使用的所有型号的APEX的一对前沿涡旋的初始化,以及urans结果下游的稳定涡流结构区域。然而,DES结果表明涡旋击穿后大量分离的螺旋流动的区域。击穿区域中的湍流量分析进一步了解导致这种现象的机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号