首页> 外文会议>International Mechanical Engineering Congress and Exposition >MODELING AND DYNAMIC CONTROL OF A BIOREACTOR FOR GLYCERIN CONVERSION TO 1,3 PROPANEDIOL
【24h】

MODELING AND DYNAMIC CONTROL OF A BIOREACTOR FOR GLYCERIN CONVERSION TO 1,3 PROPANEDIOL

机译:甘油转化为1,3丙二醇生物反应器的建模与动态控制

获取原文

摘要

The increasing production of biodiesel generates high quantities of glycerin as major co-product in the process. The potential use of glycerol includes pharmaceutical, cosmetics and food industries; furthermore, its bioconversion to 1,3 propanediol (PDO) represents a novel application in biopolymers area. This investigation focuses on the development of a dynamic model and control of 1,3 PDO production from residual glycerol of biodiesel process by Clostridium diolis strain in a continuous bioreactor. The biological conversion was simulated using the Monod model with product inhibition factor and includes temperature and Ph influence on biomass growth rate. Dynamic behavior of the bioreactor showed a maximum mass flow of 1,3 PDO equal to 79.95 mM*h-1 with a dilution rate 0.23 h-1, while the maximum concentration of the product 539.5 mM*L-1 was achieved with 0.1 h-1 as dilution rate. Based on the model evaluated, two control strategies were implemented, a proportional integral control (PI) and a dynamic matrix control (DMC), its performance was compared using the integral of the absolute error (IAE) at four operating conditions; the results showed IAE values of 13.5 and 53.4 for the best DMC performance (??=1) and for the PID 11.9 and 54.8. Also, the integral of the average valve signal (IMV) was evaluated showing a 40% reduction for DMC performance respect to PID performance, improving as well the use of the control valve during continuous operation
机译:生物柴油产量的增加产生高量的甘油作为该方法的主要共同产品。甘油的潜在用途包括药物,化妆品和食品工业;此外,其生物转化至1,3丙二醇(PDO)代表了生物聚合物面积的新应用。本研究侧重于通过在连续生物反应器中的蛋白质Diolis菌株从生物柴油的残留甘油的动态模型和控制1,3PDO生产的动态模型和控制。使用具有产品抑制因子的Monod模型模拟生物转化率,包括对生物质生长速率的温度和pH。生物反应器的动态行为显示出1,3pdo等于79.95mm * H-1的最大质量流量,稀释率为0.23h-1,同时通过0.1小时实现产物539.5mm * L-1的最大浓度-1作为稀释率。基于评估的模型,实现了两种控制策略,比例积分控制(PI)和动态矩阵控制(DMC),其性能在四个操作条件下的绝对误差(IAE)的积分进行了比较;结果显示了IAE值为13.5和53.4的最佳DMC性能(?? = 1)和PID 11.9和54.8。此外,评估了平均阀信号(IMV)的积分,显示了DMC性能的40%,对PID性能的影响,还改善了控制阀在连续操作期间的使用

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号