首页> 外文会议>Symposium on Nuclear and Environmental Radiochemical Analysis >AUTOMATED PRODUCTION OF ~(18)F PSMA-1007 USING 7.5 MEV CYCLOTRON: A FEASIBLE ALTERNATIVE FOR REMOTE SITES
【24h】

AUTOMATED PRODUCTION OF ~(18)F PSMA-1007 USING 7.5 MEV CYCLOTRON: A FEASIBLE ALTERNATIVE FOR REMOTE SITES

机译:使用7.5 MeV Cyclotron的自动化〜(18)F PSMA-1007:远程站点的可行替代方案

获取原文

摘要

The necessity of targeting the prostate-specific membrane antigen(PSMA)with a radiotracer other than the generator-based [~(68)Ga] PSMA compounds,led to the production of the ~(18)F labelled PSMA-1007.The production of [~(18)F]PSMA-1007 was achieved using a 7.5 MeV cyclotron and the NEPTIS mosaic-RS automated synthesis module.After the first 36 batches,the mean percentage yield(decay corrected)was calculated to be 57.0 ±10.1 % and the average activity in the final product vial reached 2.1 ± 0.5 GBq,which can be translated to approximately 3 patients per cassette;using a single PET/CT scanner.The time needed for the synthesis and quality control was 65 minutes.In order to reach an initial activity high enough to produce more than one dose per cassette and therefore for it to become economically viable to produce the radiopharmaceutical,95 to 100 minutes of bombardment were required at a requested 5.5 uA target current.PET images have shown the expected results according to the literature.
机译:以比基于生成器的[〜(68)镓] PSMA化合物,导致生产的〜(18)的F标记的PSMA-1007.The生产其它放射性示踪剂靶向前列腺特异性膜抗原(PSMA)的必要性的[〜(18)F] PSMA-1007是使用7.5兆电子伏回旋加速器和NEPTIS镶嵌-RS自动合成module.After前36个批次中,平均百分产率(衰变校正)实现经计算为57.0±10.1%并且在最终产物小瓶的平均活性达到2.1±0.5吉贝,其可以被转换为每暗盒约3的患者;使用所需的合成和质量控制的单个PET / CT scanner.The时间为65 minutes.In为了达到初始活性足够高,以产生每盒多于一个剂量,并且因此它成为经济上可行的,以产生放射性药物,要求以所要求的5.5微安目标current.PET图像95至100分钟的轰击显示预期的结果根据literatur e。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号