首页> 外文会议>Conference on high-power lasers and applications >Characteristic research of the waveguide by nanosecond laser pulses on LiNbO_3
【24h】

Characteristic research of the waveguide by nanosecond laser pulses on LiNbO_3

机译:纳秒激光脉冲对LINBO_3的波导的特征研究

获取原文

摘要

The damage threshold and morphology of optical material have been investigated by 800nm, 75MHz, 30fs laser pulses, in 40 magnification and 0.65 numerical aperture (NA) objective in the Z-LiNbO_3 crystals. The influence of several experimental parameters, for example energy per pulse, a ser scanning speed, or repeat time on writing quality and the characters of relative microstructures has been analyzed and studied in theory. The damage structural change, from small refractive index changes to micro explosion structure in LiNbO_3 induced by high intensity nanosecond laser is studied. Nonlinear interactions of nanosecond laser and transparent material are discussed. The subsurface morphology of the processed structures inside the LiNbO_3 was obtained by a Nikon optical microscope. Particularly, we find that the wider width of the buried channel with the increase of energy per pluse, repeat time and the reduce of scanning speed. It was caused by the avalanche ionization and multi-photon absorption of lithium on the processed area, and which is also lead to the refractive index change rang by the writing conditions. The result shows that the propagation of optical waveguide could achieve ideal effect when the energy per pluse is under 300mW, the scanning speed is from 0.05mm/s to 0.2mm/s, and the focus depth is from 350μm to 400μm.At last, in this approach, the insertion loss of 1×4 optical splitter is less than 1dB/cm.
机译:已经研究了800nm,75MHz,30FS激光脉冲,在Z-LINBO_3晶体中的40个倍率和0.65个数值孔径(NA)物镜中研究了光学材料的损伤阈值和形态。在理论上分析了几种实验参数,例如每次脉冲的能量,SER扫描速度或重复时间和相对微观结构的特征的影响。研究了从高强度纳秒激光诱导的LINBO_3中的小折射率变化的损伤结构变化。讨论了纳秒激光和透明材料的非线性相互作用。通过尼康光学显微镜获得LINBO_3内的处理结构的地下形态。特别是,我们发现埋地通道的更宽宽度随着每个小便,重复时间和扫描速度的降低而增加。它是由在处理区域锂的雪崩电离和多光子吸收引起的,其也导致由写入条件的折射率变化就响了。结果表明,当每水垢的能量低于300MW时,光波导的传播可以实现理想效果,扫描速度为0.05mm / s至0.2mm / s,焦深度为350μm至400μm.AT,在这种方法中,1×4光分离器的插入损耗小于1dB / cm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号