Bilateral Comparison on dead weight Force Standard Machines using calibration of force proving instrument was carried out between National Metrology Institute of Turkey (TUBITAK UME) and National Measurement and Calibration Center at Saudi Standards, Metrology and Quality Organization of the Kingdom of Saudi Arabia (SASO NMCC). In this comparison, TUBITAK UME was pilot laboratory and supplied the travelling standard with force transducers. The bilateral comparison is performed by measuring force values taken from force standard machines located in TUBITAK UME and SASO NMCC. Three different capacities force transducers were determined for this comparison in prepared technical protocol. The comparison was published BIMP database on GULFMET.M.F-S2 code. The comparison was used in project UME-KV-D3-2.10.6.b code. Each participant used their own measurement standards and applied the direct comparison transfer method at comparison. There is a good agreement between TUBITAK UME and SASO NMCC results.
展开▼
